Recent content by Zeus

Thanks for all the replies guys make me feel beter :)

Thanks good to hear!!

Hi Guys I have had this tick sound since I can remember but searching the interwebs plenty people put it donw to bad lifters. So the lifters and cams get replaced. So I am not sure is mine lifters or normal? Thanks

Mine will heat up a bit on long uphills but never over heat. Highest I saw was 236 en then the fan kicks in and brings it right down. Also once I crest the hill it drops down back to normal very quickly.

Also from South Africa I feel your pain on the fuel prices, but with our road conditions I love my 35's on the Jeep so gladly paying the fuel bill. To get it back to km's just click the reset button on the steering wheel while you on the fuel consumption screen and it wil flip between mpg and...

I think it's needed, going up a long steep hill on a hot day you would want it to be there ;)

I just did the Fox 2.0 Adjustables last week and boy what an upgarde from the Billstein 5100's, I know you cannot compare the 2. Driving on setting 3 front and 2 rear and what an awesome ride

Thanks appreciate the help

Thanks Eddie Luckily there is no sound you can just feel it when you put your hand on the drag link TRE at the pitman arm, it's like you feel something moving inside but very faint. Jeep drives 100%

Hi Guys I would appreciate some advise. I had to centre my steering wheel and the jam nuts was a pita to get loose, ended up with a big shifting wrench and a rubber mallet and job was done. Now I am scared I maybe damaged the Metalcloak ball joint at the pitman arm while banging on the...

Take your winch rope under the Jeep hook it to the tow bar and pull the rear down a bit :ROFLMAO: just joking. 3.5 will not work, I agree with Eddie you will have a crazy lifter front end.

Pioneer with no issues in 3 years of hard trails

Regeared to 4.88 and no noise or leaks, but made sure my Jeep went to an expert, I am very vary of gears as my previous car a Suzuki Jimny I had ARB lockers installed and the carrier bolts was not tightened to spec and they came loose. Not a good experience.

Ok all sorted, axle was a bit over filled, they corrected the level and no more oil coming out of the breather hose.

That looks really good. I fitted the rack and really happy with it and for what I want use it it will be perfect.