Search results

Planing on getting rid of the hood sound matt, I can use the under hood for mounting things. Not much space in the engine bay so mounting under the hood becomes an option. There is 2 to 4in of clearance between the hood and engine parts ect. What about redirecting the water that comes through...

This is great, thanks.

I have the shocks, control arms, track bars & springs from my 2021 4dr Rubicon. Having trouble finding info on someone putting this suspension into 2019 JL 2dr. ( I have friend with the 2dr) What will the benefits be? Is the swap straight forward? Thanks

I don't have their track bar just the sector shaft brace. I do know what snake oil is though. lol By the way my wife has some attenuators stuffed away in her drawer.

So contacted their customer service via email on web site last night thinking if didn't hear first thing this morn. would be giving them a call. They responded promptly this morn. They are sending me a modified nut for extra clearance. Seems most of the braces are sold to jeeps with lift...

"Attenuators" are snake oil. don't get what you mean by this?

I believe the wrong diff cover was installed, looking at MC site there are 2 for dana 44. 1 for dana 44 and 1 for wrangler dana 44. Difference by looking at pictures the wrangler one is flatter. Waiting to hear back from shop that installed this.

Well had to go look but yes it is rubbing. This is a metalcloak diff cover. Long story short they had to replace the diff housing and the new one didn't come with a diff cover so they used one from their shop. Don't know if the OEM One rubbed or not but it would have been close.

I have 2021 JLUR OEM. I installed the sector shaft brace by steersmarts. I know when I finished the clearance was tight from new sector shaft nut and track bar. Went out the other day and upon heavy compression the nut and track bar make contact. See pictures, they are taken with jeep in static...

yes that would work but I want them separate.

When you say "runs along top of passenger side frame rail" You are talking about the jeeps frame? Installing backup lights below the taillights. I will look closer. Thanks

Looking for the route that the existing wiring loom uses so I can follow with the new wiring for lights rear.

Cb bar ok Switches $$$$600 But I bet they work dam good!

is that on a jl? and where is the switch box located?

I am installing some lights etc. I know I have 4 accessory switches and wiring for these. (Rubicon) These 4 wouldn't be enough, I need min. 6 cct. for now. If nothing else would like the fuse block for termination point and expansion. Ideally would located next to the battery and existing fuse...

Thanks all, will change my technique

I know the manual says to shift the t case when moving slightly and in neutral. I know when I first had my jl that seemed to be the case. The other day I tried shifting when fully stopped and it went in no problem. What do others do and what works? Also after I was in 4 low I had a bugger of a...

I had some info from another site, does this person have any valid points? "at 37s for off road where 37s are needed the axle shafts may be an issue. We had a 2020 JLUR on 37s on our Rubicon last June run break the front axle shaft long side. Steering wont have enough power. Street the stock...

I get the difference between negative offset and backspacing now.

Simple, offroading😁 But seriously I like more technical trails including light rock crawling. Use the fsr to find trails and explore. Not a mudder but if the trail has mud in the way so be it. Winter is around the corner so some snow runs.