What was done to your rig this week?

Brankz

Brankz

New member
Armydog said:
Put on these silly little security door nuts. Should slow down some asshat who wants to borrow my half doors this summer. Sounds crazy, but I think about stuff like that!

At least they would need an Allen wrench to get them off, which would give me enough time to release the dog on the scum bucket.

View attachment 76730 View attachment 76731 View attachment 76732

Stainless looks good. Didn't have any nuts on there before, gotta have nuts!


Sent from my iPad using WAYALIFE mobile app.......
Click to expand...

No to make pull your leg or anything but do I need to use the screws in my doors? I took them off
 
k8ytree

k8ytree

New member
So minor touch this week. Got my mirrors relocated with the Rough Country brackets. Black jeep. Black parts. Easy enough.
Only thing I found hard was getting the housing right on the drivers side. Must be because I'm short that I couldn't get the angle right!
ImageUploadedByWAYALIFE1396443510.330539.jpg
ImageUploadedByWAYALIFE1396443526.718158.jpg

OlllllllO topless wave OlllllllO
 
kaptkrappy

kaptkrappy

New member
k8ytree said:
So minor touch this week. Got my mirrors relocated with the Rough Country brackets. Black jeep. Black parts. Easy enough.
Only thing I found hard was getting the housing right on the drivers side. Must be because I'm short that I couldn't get the angle right!


OlllllllO topless wave OlllllllO
Click to expand...


It's not you, most complain about the passenger side view with relocated mirrors.

.
 
k8ytree

k8ytree

New member
kaptkrappy said:
It's not you, most complain about the passenger side view with relocated mirrors.

.
Click to expand...

Ya I can see why (ha bad pun). Half if it is gone. Driver side was just an angle issue. Once I moved the housing it wasn't bad.
I especially liked the 'filler' plates that came in the kit. It's a nice touch to keep debris out the bolt holes and gives a better appearance.
 
cozdude

cozdude

Guy with a Red 2-Door
k8ytree said:
Ya I can see why (ha bad pun). Half if it is gone. Driver side was just an angle issue. Once I moved the housing it wasn't bad.
I especially liked the 'filler' plates that came in the kit. It's a nice touch to keep debris out the bolt holes and gives a better appearance.
Click to expand...

I have the same issue lol my passenger mirror is no existent when my doors are on. When they are off it is semi useful.


Sent from my iPhone
 
13gecko

13gecko

New member
Last weekend I took my old bumper and stinger off my rig and installed it on my wife's rig.

Then installed my new EVO quarter pounder bumper and stinger and rear fascia and D rings.

Then yesterday I had the EVO sliders and gussets installed along with the JE REEL front and rear drive shafts.

Next week the EVO rear skins and tire carrier will go on and I can finally move the rear license plate to the carrier.
 

Attachments

  • 1396477803171.jpg
    1396477803171.jpg
    84.8 KB · Views: 328
  • 1396477842734.jpg
    1396477842734.jpg
    72.2 KB · Views: 326
  • 1396477889790.jpg
    1396477889790.jpg
    59.5 KB · Views: 319
  • 1396477926943.jpg
    1396477926943.jpg
    51.4 KB · Views: 323
  • 1396477943410.jpg
    1396477943410.jpg
    47.7 KB · Views: 320
  • 1396477956897.jpg
    1396477956897.jpg
    74.6 KB · Views: 324
  • 1396477967980.jpg
    1396477967980.jpg
    63.6 KB · Views: 320
JKbrick

JKbrick

Active Member
13gecko said:
Last weekend I took my old bumper and stinger off my rig and installed it on my wife's rig.

Then installed my new EVO quarter pounder bumper and stinger and rear fascia and D rings.

Then yesterday I had the EVO sliders and gussets installed along with the JE REEL front and rear drive shafts.

Next week the EVO rear skins and tire carrier will go on and I can finally move the rear license plate to the carrier.
Click to expand...

Really liking your rig, looks great.
 
You must log in or register to reply here.
Top Bottom