I thought you self banned yourself yesterday?Yes we measured our jk SB and dia it should work. Just double check your dia and bushings then swing up and down to double check clearance. Install your end links and set to about 25° should look like it slants slightly upward. Your end links may tilt inward or outward and do not need to be perfectly horizontal as long as they do not bind and the tilt isn't too far off center.
So you’re not self banning?No problem if you need some end links I have a OEM set 9" 100 miles I can send ya.
Is that even English?TIP OF THE DAY: Always get your merchandise from people at locations where those particular people talk shit about that particular location.
View attachment 379146
Eddie your a 2 faced bitch
Hey I Have some freebies prefer Veterans or if you must reuo your rig please pay it forward.
1 a full set of 5 JLUR wheels with spare amd sensor no tires on all vut spare new with lugs
4 1.5" spidertrax spacers with lugs
Full set of JLUR fenders partially fender mod cut with AAL hardware kit
OEM ss antenatal
2 weeks Rancho front and read track bars
2 weeks Mopar 2" lift coils
OEM swaybar 9" endings
OEM LED DRL amber side markers need to be replaced I cut harness too short
OEM spare tire carrier no camera no light