BamBamDeer
New member
Sounds like you had fun. You have made me anxious!
Sounds like you had fun. You have made me anxious!
Looks like I will have a spacer lift and CB by time we go. Maybe 35s....lol. Going with spacers until I figure out for sure what I want. It should level me out as well.
I would seriously just go for the Evo leveling kit if I was you
That's what I am leaning towards. I figure with the spacers I can give them to someone that needs them when I make up my mind and I am not out much.
I decided to go with the Midland 75-822. I am going to mount an antenna on the back. I can stow the unit in my console when I don't need it.
There is so many options out there as far as what to do lift wise. I know I won't be putting 37 on for a long time, that's why the Evo leveling kit works just fine for me
I am still researching. I eventually want to go to 37s after a PR44 up front but that is in the future. In the mean time I had planned to go to 35s. I only want to spend money once on a good lift. Spacers and trimming the fenders will let me run the 35s on my way to my ultimate build. I don't want to get into a big hurry then waste money. Besides...if we did it all at once we wouldn't have anything to look forward to.......lol
I just realized I told you that about the CB earlier ha. Sorry. Working everyday with no days off for the last month is really starting to make everything run together where I don't know what in the hell to do anymore. And I don't see a day off in the future. I have some much crap in boxes sitting at home to go on our jeeps that I can't even work on them
I am going to invest a little more in some recovery gear. I don't know if I will have a winch by our trip. I don't want a cheap one so we will have to see.
Our TV went out and I had to buy a new one. That was some upgrade money....gone. After one night of watching a 24" screen...it was a no brainer.
If anyone thinks of a "must have" let me know. If y'all say it's "must have" I can tell the Wife "we can't go unless we get it".........
I am still researching. I eventually want to go to 37s after a PR44 up front but that is in the future. In the mean time I had planned to go to 35s. I only want to spend money once on a good lift. Spacers and trimming the fenders will let me run the 35s on my way to my ultimate build. I don't want to get into a big hurry then waste money. Besides...if we did it all at once we wouldn't have anything to look forward to.......lol
Based on this I would highly recommend the Enforcer 3 or 4 in kit. You can clear 37s on the 3 inch springs with the proper bump stops and trimmed fenders. I am looking at the 4 inch kit just to get a little more lift. Ive heard some of the people on here say that with the 37s and a 3 inch they bottom out when loaded down. So I want to go to the 4 inch.
Well tires and a lift can always be a must have
I appreciate the info. I plan on trimming the fenders. Nice to know about bottoming out when loaded. A lot of my adventures will be a way from the house and I will be loaded.
I have zero experience with that, that's just what I've heard on here. Might check with others also before you make the decision. [emoji106]