Ordered a 2013 Rubicon Unlimited 2 weeks ago and dealer called today and said they gave it a VIN # now. So I hope it is getting closer to being built. My plan is as follows. I am going to run 35" tires on stock fender flares and add a after market bumper and winch. I was going to run a 2 1/2 " lift so I could keep the full factory warrienty but I like the way a 4 door rubi sits on a 3 1/2" lift and 35's. So I have the lift narrowed down to these 3 3/12" lifts. Terraflex, Rock Krawler, and Rubion Express. 3 1/2" Rubicon Express is ahead because I know a gut that has the 2 1/2" on his 2 door and its nice. I used the search in the forum and spent hours looking at member profiles that had close that i was looking for and sent them a P.M. two weeks ago. None of the 5 people I sent P.M. to got back with me so her I am needing some questions asked. If I go with the 3 1/2 " Rubicon Express lift,Rubicon Express Part RE7142 - 3.5" Standard Suspension System-RH2 is there anything else in this lift that i will need becides these Steering Stabilizers & Brackets - Lift Kits, Suspensions & Shocks - -RH2. plus 2 of these Rubicon Express Part RXJ713 - Rubicon Mono-Tube Shock -RH2 and two of these Rubicon Express Part RXJ714 - Rubicon Mono-Tube Shock -RH2. also read where NOT to install the front cam bolts but get these brackets JK Geometry Correction Front Control Arm Drop Brackets - JK Suspension - Suspension - Shop By Category... yes or no? also going to get the front and rear coast 1310 drive shafts. Im going to run a full 35" tire on the back so I plan on getting these from Terraflex...| TeraFlex Suspensions and | TeraFlex Suspensions. With the added weight from the bumper winch full spare tire and rear bumber nurf bars should i add spacers in the front and rear to keep the springs from sagging over time? Already got the PROCAL frov AEV sitting and waiting . Gonna run the MB72 15x8 black finish on 35x12.5x15 Good Year MTR. Jeep color is Billit Silver. so a 2013 Rubi with a 3 1/2 lift on MB72 with MTR and coast 1310 shafts, missing any think? Please let me know what else I need to get before I start to order this stuff. Its my very own first new Jeep, Ive hade 4 others , and I want to buid it the correct way right off the bat. With this lift if I choose to down the line I can add to it. Any tips and hints with this build will be greatfully appreciated Thanks in advance... NOLUCK13 Copied from here: http://www.jk-forum.com/new-member-registry-21/new-soon-jk-owner-southern-illinois-questions-262648/