Anvil Jeep Build - Jetlau3

IMG_6500.jpg
IMG_6501.jpg
IMG_6513.jpg

Test fit the evo front bumper skid plate and now just need to paint .

Got the rockstars installed . Was a PITA . Brackets were all folded over, went through 4 M18 batteries with sawzall and grinder but looks good now that it’s done .

Greasing that joint seems like it’ll be a huge problem moving forward ..



Sent from my iPhone using WAYALIFE mobile app
 
Looks good! The real Jeep and the RC.


Sent from my iPhone using WAYALIFE mobile app

Thanks both are progressing ... slowly

Good job! Those Rockstars are a pain in the ass.



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

Haha no kidding . Lot of pry bar and hammer

Looks good man... I’ve had Rockstars on my bench for over a year.. Lol

Get on it man !! Need just 5 hours give or take



Sent from my iPhone using WAYALIFE mobile app
 
View attachment 345237
View attachment 345238
View attachment 345239

Test fit the evo front bumper skid plate and now just need to paint .

Got the rockstars installed . Was a PITA . Brackets were all folded over, went through 4 M18 batteries with sawzall and grinder but looks good now that it’s done .

Greasing that joint seems like it’ll be a huge problem moving forward ..



Sent from my iPhone using WAYALIFE mobile app

Good job Dan. I found an angle grinder beneficial with the rockstar install.

As far as greasing the rear LCAs I found a 90 degree adapter that works to grease mine. Got mine at oreilly's not Amazon.Screenshot_20200413-085348_Amazon%20Shopping.jpg

Sent from my SM-G965U1 using WAYALIFE mobile app
 
Looks good man... I’ve had Rockstars on my bench for over a year.. Lol
Same here. I just finally got the plush rides installed...haha.

Good job Dan. I found an angle grinder beneficial with the rockstar install.

Sent from my SM-G965U1 using WAYALIFE mobile app
That was my thought. I need to get a couple more 30 grit flap wheels. I have plenty of cut off wheels. I may get them installed incase next 6 months...haha.

Sent from my SM-G973U using WAYALIFE mobile app
 
Good job Dan. I found an angle grinder beneficial with the rockstar install.

As far as greasing the rear LCAs I found a 90 degree adapter that works to grease mine. Got mine at oreilly's not Amazon.View attachment 345269

Sent from my SM-G965U1 using WAYALIFE mobile app

I used that adapter for awhile, but I started using a needle point to grease them and it works a lot better.



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

I’ve got a needle nose so will try that first .

Looking good brah...

Looking good Dan

Thanks. Figuring out installs 1 mod at a time . The rockstar skid install was pretty involved for me . Watching Eddie do it on the write up .. I was not prepared for the issues that came up with the stock brackets both axle and frame side being so jacked up .

Haven’t built up the courage to do the transmission filter and fluid even though everything is just sitting here .

Coming up on 3 years in July . 34k miles since I got the Jeep

IMG_7208.jpg


Sent from my iPhone using Tapatalk
 
Top Bottom