What was done to your rig this week?

[jdofmemi]

That rotor can be tough to get off if it’s rusted on.


Sent from my iPhone using WAYALIFE mobile app

The joys of rust. Get a bigger hammer.

Installed some metal cloak jounce bumpers. OEs were shot after 10 years. We’ll see how these go.


Sent from my iPhone using WAYALIFE mobile app

I put those in recently. Not sure if I remembered to show you. I was very impressed with them so far, even though I only had three of four when we did Mojave Road.

I never felt the normal crash in the rear from bottoming hard like I used to.

Front I could tell the difference side to side, one with MC and one stock. I just ran out of time the night before we left.

 

[fiend]

I put those in recently. Not sure if I remembered to show you. I was very impressed with them so far, even though I only had three of four when we did Mojave Road.

I never felt the normal crash in the rear from bottoming hard like I used to.

Front I could tell the difference side to side, one with MC and one stock. I just ran out of time the night before we left.

Good to hear. I had a few hard hits on Mojave Road, and my stock bumps had seen better days. I think these will be a nice improvement.




Sent from my iPhone using WAYALIFE mobile app

 

[jesse3638]

Good to hear. I had a few hard hits on Mojave Road, and my stock bumps had seen better days. I think these will be a nice improvement.




Sent from my iPhone using WAYALIFE mobile app

Jerry suggested these to me along with pointing out I have been running 4" bumps in the rear. Until recently I was on a 3" lift so that explains why the rear bottomed out hard pretty frequently.

Sent from my SM-G973U using WAYALIFE mobile app

 

[ThatJeepGuy]

Jumped on the band wagon with the throttle controller/booster

Don’t mind the E locker switch it’s actually an arb just need a new cover

 

[BaddestCross]

I've got a set that I have yet to install. Just gonna use the rear.



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

 

[fiend]

Jerry suggested these to me along with pointing out I have been running 4" bumps in the rear. Until recently I was on a 3" lift so that explains why the rear bottomed out hard pretty frequently.

Sent from my SM-G973U using WAYALIFE mobile app

I’ve recently been focusing on getting rid of unnecessary bump stop to get more travel.

You should see the benefits [emoji1303]

Sent from my iPhone using WAYALIFE mobile app

 

[jesse3638]

I’ve recently been focusing on getting rid of unnecessary bump stop to get more travel.

You should see the benefits [emoji1303]

Sent from my iPhone using WAYALIFE mobile app

I think im going to just make some out of 3" square tubing.

Sent from my SM-G973U using WAYALIFE mobile app

 

[JKbrick]

Swapped from bushwacker flares to MCE

View attachment 348465

View attachment 348466

I really like the MCE fenders, do you keep your factory fender liners?


Sent from my iPhone using WAYALIFE mobile app

 

[fiend]

I think im going to just make some out of 3" square tubing.

Sent from my SM-G973U using WAYALIFE mobile app

I was going to do that but found some Synergy stops on sale for $38 or something like that and just went with those.


Sent from my iPhone using WAYALIFE mobile app

 

[jesse3638]

I was going to do that but found some Synergy stops on sale for $38 or something like that and just went with those.


Sent from my iPhone using WAYALIFE mobile app

Yeah i found those yesterday for $50. I have a local steel yard where I could probably get some scrap for a few bucks.

Sent from my SM-G973U using WAYALIFE mobile app

 

[RyanHanley]

I really like the MCE fenders, do you keep your factory fender liners?


Sent from my iPhone using WAYALIFE mobile app

Yeah I already had them cut to fit from my old bushwacker fenders so I didn’t have to trim them anymore.

 

[fiend]

Installed Dynamat and Dynaliner on the drivers side (front and back) today. Pretty time consuming project. Hopefully it will help insulate the driver’s seat from the hot-assed exhaust pipe. Maybe some sound deadening too, although I’m not going to notice that much with the half doors and no top. Still have 5 sheets of dynamat for the passenger side. Next cool weekend.


Sent from my iPhone using WAYALIFE mobile app

 

[-AINOKEA-]

Finally got around to installing the diode dynamics clear side markers. Cleaned up the front end pretty nicely in my opinion.




Sent from my iPhone using WAYALIFE

 

[HappyJeeper]

Got lift on

I got the Icon Stage 2 2.5" lift installed. Now for some 37's.

 

[wjtstudios]

I got the Icon Stage 2 2.5" lift installed. Now for some 37's.

Definitely looks 37 ready [emoji106]


2015 JKUR AEV JK350
1985 CJ8 Scrambler

 

[Arrcherr]

After 1.5 years of driving around with a crack that went clear across the windshield I finally got replaced.

Sent from my Pixel 2 XL using WAYALIFE mobile app

 

[Bierpower]

After 1.5 years of driving around with a crack that went clear across the windshield I finally got replaced. View attachment 348742 View attachment 348743

Sent from my Pixel 2 XL using WAYALIFE mobile app

You're going to be so mad next week when that one cracks.

Sent from my Pixel 2 XL using WAYALIFE mobile app

 

[Arrcherr]

Well let's hope not but you're probably right [emoji23]

You're going to be so mad next week when that one cracks.

Sent from my Pixel 2 XL using WAYALIFE mobile app

Sent from my Pixel 2 XL using WAYALIFE mobile app

 

[JKbrick]

After 1.5 years of driving around with a crack that went clear across the windshield I finally got replaced. View attachment 348742 View attachment 348743

Sent from my Pixel 2 XL using WAYALIFE mobile app

Now you need a new sticker


Sent from my iPhone using WAYALIFE mobile app

 

[Arrcherr]

Now you need a new sticker


Sent from my iPhone using WAYALIFE mobile app

Absolutely, gonna have to order one now

Sent from my Pixel 2 XL using WAYALIFE mobile app