What was done to your rig this week?

20180626_183521.jpeg
I installed my compressor. I went with the under passenger seat mounting kit from Innovative JK Products. I'm pretty happy with the setup

Also, some knock- off Chinese lights. These were cheap enough I bit. I have low expectations for them, but 50 ft away & squinting they don't look half bad. No way I was gonna pay $725 for the real McCoy.
20180626_180757.jpeg
 
View attachment 304474
I installed my compressor. I went with the under passenger seat mounting kit from Innovative JK Products. I'm pretty happy with the setup

Also, some knock- off Chinese lights. These were cheap enough I bit. I have low expectations for them, but 50 ft away & squinting they don't look half bad. No way I was gonna pay $725 for the real McCoy.
View attachment 304475

I see dinner plates so it’s time to eat! [emoji23]
 
My Warn pull strap was looking pretty frayed, so I found a company that makes custom pull straps
 

Attachments

  • 2018-07-02_13-37-30_281.jpg
    2018-07-02_13-37-30_281.jpg
    71.9 KB · Views: 322
  • CAC6DFA3-7DA1-4CDE-8B42-E916411369E2.jpg
    CAC6DFA3-7DA1-4CDE-8B42-E916411369E2.jpg
    155.4 KB · Views: 337
Out with the stock lower control arms, including the broken and spliced together one from the last run

In with the new CORE Tier 3 arms. These suckers are beefy. Probably overkill, but I'm sure no matter what I do, they won't be breaking again.
 

Attachments

  • IMG_20180630_191228.jpg
    IMG_20180630_191228.jpg
    67.3 KB · Views: 286
Out with the stock lower control arms, including the broken and spliced together one from the last run

In with the new CORE Tier 3 arms. These suckers are beefy. Probably overkill, but I'm sure no matter what I do, they won't be breaking again.

Save that one as a trophy.
 
Save that one as a trophy.

Yep

Goes on my wall of shame. Just starting one for the Jeep, this and one axle shaft.

The Toyota wall was overflowing. I quit putting pieces on unless it was something uncommon, like the Detroit Locker I broke.
I think the only thing I never broke was the engine and a U joint. Why would a $7.00 U joint fail when a ring gear could break?
 
Was a busy saturday in my garage. Helped a friend install the following on his Blue Chief JKUR

3" Evo Enforcer lift with Rancho Adjustables
Adams front driveshaft
Evo drag link flip
37" Cooper STT Pros.

This is the 4th Evo kit I've installed for guys at my work, all of them absolutely love the ride. Although he made quick harbor freight run for the 1 1/4" socket for the driveshaft in mine with Kings and I think he's regretting his decision on the Rancho's now lol
 

Attachments

  • GxjAPwe.jpg
    GxjAPwe.jpg
    117.2 KB · Views: 354
  • mtlfSaj.jpg
    mtlfSaj.jpg
    51.7 KB · Views: 320
  • N0uibnq.jpg
    N0uibnq.jpg
    56.2 KB · Views: 323
Picked up some MCE flares of CL for a song. After 8 years, finally ditched my stock fenders. [emoji22]
 
Put some reverse lights on the crossmember. My EVO corners/carrier are going to be here soon, and the LED tail lights don't have reverse, so I stole this idea from someone here.

Turned out pretty well, I think. I hate dealing with electricity (I've shunned it since I'm colourblind) but I had no issues. Quick taps made it super easy.

e2hQ3dB.jpg
 
Got the new axles installed. I guess it was a couple weeks ago now but I'm lazy on catching up... got the half doors back on afterwards too for our whopping 3 month summer season

received_10156468441214539.jpg
received_10156468627374539.jpg
20180611_210014.jpg

Sent from my SM-G930V using WAYALIFE mobile app
 
Put some reverse lights on the crossmember. My EVO corners/carrier are going to be here soon, and the LED tail lights don't have reverse, so I stole this idea from someone here.

Turned out pretty well, I think. I hate dealing with electricity (I've shunned it since I'm colourblind) but I had no issues. Quick taps made it super easy.

e2hQ3dB.jpg

Great looking lights.


Sent from my iPhone using WAYALIFE mobile app
 
Top Bottom