Random (non-Jeep) Shit You’re Working On....

[TOPLESS]

Put a couple of these together after work today. Been wanting some of these poly chairs for the fire pit for awhile.

 

[Andy5160]

Put a couple of these together after work today. Been wanting some of these poly chairs for the fire pit for awhile.

Nice!!

 

[OverlanderJK]

Put a couple of these together after work today. Been wanting some of these poly chairs for the fire pit for awhile.

There is a place not far from us that has those but in rocker/glider form. We are really thinking about getting some for our porch.

 

[CalSgt]

Put a couple of these together after work today. Been wanting some of these poly chairs for the fire pit for awhile.

My wife bought a whole set of those with the rocker option and a matching porch swing, so far they've held up great for the most part.

There is a place not far from us that has those but in rocker/glider form. We are really thinking about getting some for our porch.

One of my rocker glider's ended up buckling due to a screw in the glider base getting stripped, I'm not certain but it is likely my fault for assembling them with a 1/4" impact driver while drinking cocktails. I'm usually pretty skilled with the impact driver but, It took a whole evening after work to assemble them all and I was a little buzzed by the time it was done.

The plastic was dense enough to shim the stripped hole with a kabob stick & Gorilla glue it back together, works fine now.

I went through all of the fasteners and found a few starting to loosen in the bases and glider struts.

 

[Mike Pierson]

Had a swing-out tire carrier made for my trailer. Did the install today but still need to clean and paint it. With the tire on it, it adds just shy of 200lbs to the back which took 80+ lbs off the tongue. Jeep shouldn’t have an issue with a 200lb tongue weight.