It's Time to SUPERSIZE Moby - MoTech 6.2L LS Jeep Motor Swap

[jkmadness]

Getting closer...

 

[wayoflife]

Time to start building a ProRock 80!!

 

[paychex.308]

.......smells like victory. Or diff fluid, or something :thinking:

i am thinking a little mix of both!

andrew -

 

[Paisano]

Time to start building a ProRock 80!!

View attachment 41203

That thing looks beefier than my rear end on my diesel truck!


Sent from my iPhone using WAYALIFE mobile app

 

[GCM 2]

Time to start building a ProRock 80!!

View attachment 41203

Now I think I know who owns the VW camper van out front! My VW brother from another mother on the lathe!

 

[wayoflife]

A precision matched fit of spindle and tube to the thousandth of an inch...


Time to press them in...

 

[paychex.308]

WOW!!! very cool to see it being put together and the precision in which it happens!

 

[OverlanderJK]

A precision matched fit of spindle and tube to the thousandth of an inch...
View attachment 41204

Time to press them in...
View attachment 41205

Can you grab an extra 60 front and rear for me please?

 

[wayoflife]

Time to burn in the spindles...

 

[wayoflife]

Pressing the tubes into the differential housing...


Drilling the housing and getting it ready for rosette welds...


Time to get brackets welded on...

 

[pvanweelden]

i think that 80 answers the Wendy's commercial "where's the Beef?"

 

[JKAnimal]

Cool pics. It's neat to get to see the process. :thumb:

 

[wayoflife]

Housing complete...


Going in for a scrub before final assembly...


Painted up and ready to get internals installed...

 

[Serg5000]

That is bad ass.

 

[rinkishjk]

That thing is a beast!

 

[GCM 2]

View attachment 41222

Eddie, is this the actual PR80 going on Moby, I see coil spring perches?

 

[wayoflife]

Eddie, is this the actual PR80 going on Moby, I see coil spring perches?

Yes, this is the actual PR80 that's going on Moby but, we're trying to document the building of one so, we're getting all the standard mounts tack welded on.

 

[pvanweelden]

Eddie, is this the actual PR80 going on Moby, I see coil spring perches?

^ :thinking: good eye

and here i was wondering if the brackets were gonna get burned in before paint...

 

[Skorpius]

ratio

not sure if this has been asked I have missed some post but sense its axel day.

what ratio will you be running with the v8 and 40's
most places I have read say for a stock v6 you would need to run a 5.38

 

[GCM 2]

Yes, this is the actual PR80 that's going on Moby but, we're trying to document the building of one so, we're getting all the standard mounts tack welded on.

Very cool! I though you may have already taken delivery of the PR and then just documented someone else's piece of axle art getting built.