How do I remove the center console

[Brankz]

I need help! Please how do I remove the center console?

 

[EZ-E]

Kick it really hard; that should do the trick.

 

[Brankz]

Kick it really hard; that should do the trick.

It's out but I can pull it out cause it's getting stuck with something

 

[Brankz]

What can I do!!!!!!!!!

 

[Brankz]

Help any one pleas

 

[piginajeep]

Remove all the bolts, unbolt the ebrake

Check project-jk.com, there's a write up for the tuffy install


www.toasterjeep.com

 

[ridg3runner]

Should come right out. Make sure the ebrake handle is pulled up pretty tight. Probably just hanging up on one of the shifters or ebrake is all.

 

[ridg3runner]

Note: Do not remove the cables from the ebrake handle, you will regret it.

 

[Brankz]

Remove all the bolts, unbolt the ebrake

Check project-jk.com, there's a write up for the tuffy install


www.toasterjeep.com

Project jk dosent take out the. Enter console

 

[Brankz]

Note: Do not remove the cables from the ebrake handle, you will regret it.

It's getting stock by the front but I don't know how that's possible there's nothing holding it no more

That's where it gets stock

 

[ridg3runner]

It just slips under the dash, nothing holding it. Put your T-Case in low then try again, may have to pull a little harder on it.

 

[Brankz]

Lift up and pull?

Ok fuck it lets do this

 

[jeeeep]

x2 put it in 4lo and make sure the clips along the sides on the front are free then just wiggle it free...

 

[Brankz]

x2 put it in 4lo and make sure the clips along the sides on the front are free then just wiggle it free...

Nope I can't get it off! I just walk out till tomorrow, I check all around no screws or nothing holding it I just can't pull that crap out

 

[jkuone]

You tube....yup.....

 

[Brankz]

You tube....yup.....

Yup I try that but no one show how actually pull the console out

 

[txjeeplover]

First, I prefer to leave the transfer case lever in neutral during removal. The lo position can cause interference when maneuvering the console out and back in. Next, have you pulled the parking brake lever up to its max position? As I learned, if the parking brake isn't all the way back, it will push the console forward making it impossible to remove.

 

[Brankz]

First, I prefer to leave the transfer case lever in neutral during removal. The lo position can cause interference when maneuvering the console out and back in. Next, have you pulled the parking brake lever up to its max position? As I learned, if the parking brake isn't all the way back, it will push the console forward making it impossible to remove.

Not sure if all the way up, I will try it tomorrow thanks for the input I let you know if this works

 

[Brankz]

It's out thanks

Time to clean and paint

 

[Brankz]

Ok I can't post the pic of the business card but this 2 cools dudes pay for my food at Burger King they told me because they liked my rig made my week lol