Hinrichs 2.0

[scull20]

Got the trans skid on finally tonight, it was not a fun job getting those trans mount nuts off.

Cheater wrench helped me a lot, but was still a pain.

 

[WJCO]

Got the trans skid on finally tonight, it was not a fun job getting those trans mount nuts off.

Hope I didn't miss it, but what ever happened with the steering? Did they figure that out?

 

[hinrichs]

Just a little flex

 

[branman]

Just a little flex

Looks awesome! Well done :thumb:

 

[DWiggles]

Just a little HULK flex

I fixed it for ya!

 

[Ddays]

Just a little flex

View attachment 170471


LOL...Vanilla looks like he's taking a whiz!

 

[MedixJK]

Just a little flex

is that all that forklifts got? Jk. Looks badass Jim

 

[hinrichs]

To me it didn't seem like a lot of flex, I feel the swaybar wasn't disconnecting like I wanted it to up front.

 

[dcbjk]

To me it didn't seem like a lot of flex, I feel the swaybar wasn't disconnecting like I wanted it to up front.

That's not cool considering its electronic disconnect still it's nice to see some flex than none at all

 

[hinrichs]

Well slight issue, noticed my rear sway bar is hitting my brake line brackets

 

[DWiggles]

Well slight issue, noticed my rear sway bar is hitting my brake line brackets

View attachment 170557
View attachment 170558

On both sides?

 

[Havoc40]

I went to the inside of the sway bar with the brake line...not sure that matters though. I also have the clip going front to back, instead of into the frame. Installing the clip towards the frame causes the tab to stick out farther.

Also, make sure the front LCA are not hitting in the mounts. Mine were binding pretty good on the top side, which limited flex substantially on my 1st forklift attempt. I dropped them and ground away a good bit to have adequate clearance.

 

[hinrichs]

Hmm I'll move the clips now then and try and cycle the suspension again.

Did snag this today tho for a steal

 

[Stalter08Rubi]

Hmm I'll move the clips now then and try and cycle the suspension again.

Did snag this today tho for a steal

View attachment 170565
View attachment 170566

yo that's an awesome snag for real man :rock:

 

[hinrichs]

Made some 4" rear bump extensions.

 

[JohnnyD]

Good snag on the psc...

And made some???....man ur killin me...nice rig brother good show on the build!

 

[Trail JK]

Well slight issue, noticed my rear sway bar is hitting my brake line brackets

10Frank9 has a write up to reverse the brackets. I need to look for it. I've been meaning to change mine too.

 

[Trail JK]

10Frank9 has a write up to reverse the brackets. I need to look for it. I've been meaning to change mine too.

http://wayalife.com/showthread.php?t=25901

 

[hinrichs]

http://wayalife.com/showthread.php?t=25901

You beat me to it, was just going to post that lol.

So I switched out my rear links for shorter ones, which are probably a little short, but they don't hit the brake lines anymore.

 

[Havoc40]

Looks like I'll have to do that myself. Thanks for posting the link!