Hi

[kgw350]

I received some messages about the track bar bracket so when I had it on the lift I snapped a couple pics




Sent from my SCH-I545 using WAYALIFE mobile app

 

[kgw350]

Tires are here going on next week. Let the cutting of the tub begin.



Sent from my SCH-I545 using WAYALIFE mobile app

 

[catahoula]

Tires are here going on next week. Let the cutting of the tub begin.

<img src="http://wayalife.com/attachment.php?attachmentid=118487"/>

Sent from my SCH-I545 using WAYALIFE mobile app

Those are aggressively nice tires!

 

[JK LYF]

I'm a big fan of this build. Subscribing!

 

[kgw350]

Those are aggressively nice tires!

I should have them on next week. Just tring to decide if I should keep the red rings?

I'm a big fan of this build. Subscribing!

Thank you Hoop



Sent from my SCH-I545 using WAYALIFE mobile app

 

[kgw350]

Corners are almost done. My buddy modified my old AEV corners. I will be picking up a sheet of steel to add on and make full corner/side
armor and tube flairs.

Going to build rear fenders very similar to these




Sent from my SCH-I545 using WAYALIFE mobile app

 

[kgw350]

Finally had a day to mount up the 40" Trepador tires. I might have my axles sold if so the 60s are going under soon.
I need the EVO hood


Sent from my SCH-I545 using WAYALIFE mobile app

 

[xp1ik05]

Beautiful!! Saw some pics of your jeep on ocjw and been keeping an open eye to more specs on your jeep. How much bump stop were you running back in the day when you first had the 37's and 40's while rocking the stock springs?

 

[kgw350]

Beautiful!! Saw some pics of your jeep on ocjw and been keeping an open eye to more specs on your jeep. How much bump stop were you running back in the day when you first had the 37's and 40's while rocking the stock springs?

Thank you.
I was running about 3" bump stops not much up travel.

Picked up a rear dana 60 out of a 2000 E350 van and a front dana 60 out of a 1997 ford F-350
Ordered a bunch of parts today. Artec front truss system , ARB air lockers front and rear , gears with install kits , blue torch fab fear truss, ball joints, calipers rotors and pads.


Sent from my SCH-I545 using WAYALIFE mobile app

 

[xp1ik05]

Thank you.
I was running about 3" bump stops not much up travel.



Sent from my SCH-I545 using WAYALIFE mobile app

damn seems like you are able to tuck alot more than i am and im running 3.5 springs with 3in stops, crazy.......

 

[kgw350]

damn seems like you are able to tuck alot more than i am and im running 3.5 springs with 3in stops, crazy.......

Yeah it worked pretty good for what it was.

Sent from my SCH-I545 using WAYALIFE mobile app

 

[kgw350]

Got started on the front Dana 60 and some parts came in today. I'm just waiting on the front Artec truss kit and the BTF rear truss system. I am hoping to start burning the truss on beginning of next week then off to get the gears and lockers installed.
I am trading my 40" Trepadors for a set of 42" pitbull rockers.



Sent from my SCH-I545 using WAYALIFE mobile app

 

[GR8WHITE]

42's???!!!! Damn thats bad ass!

 

[13_gecko_rubi]

My buddy runs those on his, it's a monster

Sent from my Samsung S5 using WAYALIFE mobile app

 

[kgw350]

I am curious to see how the pitbulls perform.

Sent from my SCH-I545 using WAYALIFE mobile app

 

[GR8WHITE]

I am curious to see how the pitbulls perform.

Sent from my SCH-I545 using WAYALIFE mobile app

Are you going for the radials or bias ply?

 

[kgw350]

They are bias

Sent from my SCH-I545 using WAYALIFE mobile app

 

[kgw350]

I have some cutting to do. Started on the BTF truss and Artec coil spring pads.


Sent from my SCH-I545 using WAYALIFE mobile app

 

[72blubyu]

Nice it gonna be awesome.

 

[kgw350]

Nice it gonna be awesome.

Thank you.

Sent from my SCH-I545 using WAYALIFE mobile app