wjtstudios
Hooked
Glad you got it sorted
2015 JKUR AEV JK350
1985 CJ8 Scrambler
2015 JKUR AEV JK350
1985 CJ8 Scrambler
Last radiator drain came out like the pic below so I'm gonna keep going for now until it's much clearer.When I called them they gave me a part number that matches the 50/50 mix of 5 year 100k. I don't think I added much of the 10 year stuff to really make a difference but who knows. If the damn Tstat or heater core wasn't so hard to get to I'd flush it the right way but for now I'm gonna stick with running distilled through it until clear. Not hard just time consuming. View attachment 360179
Sent from my SM-G950U using WAYALIFE mobile app
I would just flush it really well with water and put auto parts store coolant in.If you’re still around, any issues after the coolant flush? My 2015 AEV 5.7 needs a flush, but this whole OAT vs HOAT issue is worrying. So AEV used HOAT on 2015 builds even though OAT was used on the 3.6s at the time? Mine looks orange, so this is frustrating.
I’m tempted to, but as OP mentioned in this thread, there’s just little room to maneuver inside these engine bays with the hemi’s. Trying to get to the block drains or heater core connections seems daunting.I would just flush it really well with water and put auto parts store coolant in.