2013 engine stall

desertrunner

desertrunner

Hooked
Asking for a friend on this
2013 JKUR auto trans 113k miles

Having intermittent engine stalling after the jeep sits for a few days.

Stall is happening after reversing once he stops getting ready to put back into drive or shortly after putting into drive. Sometimes shutters then dies sometimes shutters then back to normal.

Rabbit hole of research maybe torque converter going out or crank shaft position sensors?

Thoughts?
 
Jeep has to be saying something like Eddie said, and if still nothing I'd honestly have your friend sign up and ask/describe himself which might help him better.
 
DirtHeadDavis said:
Jeep has to be saying something like Eddie said, and if still nothing I'd honestly have your friend sign up and ask/describe himself which might help him better.
Click to expand...

Ill have him run codes on it and see what pops up.

Best full description i got from him is
"When after being in reverse for a second or two. Usually as I’m about to go back into drive. And then a couple times shortly after going back into drive, get an slight shutter. Like a reduction in power for a half second and then back to normal"
Only like 1 every 20 starts. Happens more when its sat a while and really hot days.
No other shutter or stall in any other conditions.

I asked what the RPMs are doing when it shutters and or dies. He said he would look for it next time
 
You must log in or register to reply here.
Top Bottom