Search results

Will they only offer battery car from 2024 or is it "only" the mighty v8 that goes? If I'm sad? Yes, personally I think battery cars are very boring and in most cases extreme ugly, take a look at Tesla, they all look like shit. But to be honest most cars today look like a up and down soup cups...

The frame on wranglers must be one of the strongest ever made. It is unbelievable that they dont get big dents on the frame rails. One of my friends had a defender and if you hit the frame like you guys do all the time the result where a huge dent. Gotta love wranglers. Awesome wheeling!

He might be a swede I'm from Sweden and the word vinterfrid sounds like a swedish word to me. You can translate it to something like peaceful winter. Anyway, he sounds like a typical sosse swede. Sosse is like a Democrat in us. Everything is dangerous and big brother knows best. And because...

Today when taking the jeep for a spin I tried the tap thing on the shifter and it works great. Will use that method when needed.

did not know that tapping the shifter was doing that. I´m know that you can lock for example the first or second gear and so on but once the D letyter om the dash was litted i did not know that the shifter still worked to uppshift. have to try that. But, is there no solve so that the gearbox...

Hi At last I´ve regeared from 3.73 to 4.56. Not going to say the jeep was not usable before but boy what a difference. Not hunting gear anymore for the slighest incline and has power again. so much better! Anyway, have used my procal so speedometer is spot on. My 35 inch is 33,5 in true size...

linseed oil is an old and tried method. But you have to do it once a year prefeable before winter. liseed oil is also harmless for the enviroment. Just make shure to wash the body ofthe jeep after yreatment because if the linseed dries on the paint it is super hard to remove.

thanks guys!

Hi I´ve installed my new Dana UD44 this weekend and only have some torque setting to do and fill up the diff house with oil. However, it is not untill late next week or the week after that I have time to go to a shop to have my rear axle regeared. My UD44 have 4.56 and my rear axle have 3.73...

To me it looks like you have a raised trackbar mount.

I meant to use the rotors and put a metalbar or something on them to have the same "diameter" as the tires. I just found it a bit hard to find a good spot on the tire. I just found it a bit more easy on a bar with a sharp and straight edge. I guess I answered my own question but sometimes I...

Even if using the rotors and some bars attached to them to simulate say a 35" tire I meant to have jackstands under the axle and therefore the weight still on the suspension. Now with that sad, I have also heard that the weight should be on the rotors or tires because of movements in what I...

Hi I watched and read Eddies guide how to set toe in and toe out. It is more or less crystal clear how to do it but one thing I still wonder about. Does it matter if you take the measurement from the center of the tire or can you take it from the outer side of the tire? I´m thinking it can be...

Towing capacity is a bit strange. For example, my jku sahara in Sweden is allowed to tow 4400 pounds. Some jk wranglers over here are allowed to tow 7 700 pound. I think it was mostly the rubicon ones because of the 4.10 axle ratio but there where no concintence on the towing capacities...

I´ve been diging some more into this and there is two options. one lower and one upper hole to mount the trackbar. The lower hole is at same height as stock and the upper hole is for jeeps with liftkit. However, they do not mention high much higher but I read somewhere it is 2 inches. That is...

One thing I´m not sure about. It says that the eaton e-locker is for 8.5 ring gear but all the aftermarket gear I´ve been looking at is not 8.5. the spicer 4.56 for example says ring gear is 8.9 and the yokon is 8.8. Does this matter`? And which eaton to choose? there seems to be 2 that have 4...

Hi I´m about to pull the trigger on a UD44 front axle with 4.56 ratio. One thing I´m curios on. With the AEV 3.5 inch lift kit I have the trackbar is raised 3 inch and also a flip kit came with the kit. I do have all this part mounted on my current dana30 and it works fine. However, I have not...

thanks for input. I think a elocker it will be then time is coming.

Hi Next step is hopefully to install a ud44 in my saharah with 4.56 or 4.88. Obvious I also need to regear the rear and why not put a locker in the rear to at the same time, otherwise it might not ever happen. Anyway, I was thinking about those eaton e-lockers, are they good or should I look...

I´ve now been driving with the new spicer driveshaft for some weeks and it works very well. Can not feel any vibration so I´m happy. Also no worries about the rubber boot to get torn up on the exhaust pipe. There is still a very light contact between the driveshaft and exhaustpipe but only...