Recent content by bouche03

Could easily be time to replace plugs....about that time. I had the same thing happen and changed plugs and no issue since

Thank you greatly! I will try that.!

Helpful, thank you KRDADLAMB, do you have any shots you can take with the airbox in? Is it in the 3 posts that hold it there or just laying in there tightly ?

I definitely have everything I'm supposed to form PSC. I just think I was the unlucky one that has a Jeep that was built a little different and that plastic tray holder the air-box appears to be further towards the front/grille than others...

So putting in a a PSC hydro assist and just can't fit the reservoir with the factory airbox. The bracket PSC included doesn't remotely work for my Jeep. Fabricated my own but the factory airbox still won't clear. Stumbled on this airbox/intake set up and wondering if anyone has tried it...

Wow, that stuff looks like it really gums up the cooling system. I can't imagine that being a good long term (or short term) solution!

I'm not certain Seth will know anything about the TJM lockers and the specific bearing races you will need to set things up for non-Rubicon lockers. Also, if you haven't talked to Seth yet, he will only do set ups on loose axles or Jeeps that are on a lift. So your rear will have to be out of...

trying to post the video...

Hey guys and gals, Currently planning a trip to Moab and Colorado next year, and looking to ship two Jeeps to Salt Lake, arriving a day or so before we fly into UT. Time frame would be July 22nd or so 2020. Are there any members in good standing that might be willing to take delivery of two...

My haul from Bourbonfest in Fort Wayne IN. Sent from my iPhone using WAYALIFE mobile app

Hey guys-hoping someone out there in WOF land can help a brother out. My factory track bar bushings are shot and was looking to get JKS adjustable front TB. I picked this one specifically because I need the replacement to have a narrow neck at the axle end, ala the JKS due, to the Synergy...

Last week did my progrips and this week got my PR44 in this week, re-geared to 5.13. Drag link flipped and highsteer Rancho knuckles with Currie TR. Sent from my iPhone using WAYALIFE mobile app

This is what I used. Works fine for the manual JK tranny Sent from my iPhone using WAYALIFE mobile app

I searched and wasn't able to find what I was looking for; I was hoping folks with a PR44 and a weld on Synergy front trackbar bracket could post up their photos on what it looks like. I have a new housing and a bracket to be welded on, but have to cut the factory height bracket off first...

Found this at a friends place and he let me take it home after we opened it up and drank half the bottle. Very good juice! Bottled in 1979 before Hiram Walker went under. Sent from my iPhone using WAYALIFE mobile app