No Rear Bumper?

[JKbrick]

Easy enough, I own a plumbing company! Thanks

 

[Moochie]

Easy enough, I own a plumbing company! Thanks

Perfect! They are hard to find sometimes in the big warehouse stores.

 

[catahoula]

Catahoula, are those some kind of red spacers in your d rings to keep them centered?

Daystar D-Ring Washers. Helps to keep them from rattling. It does center them as well.:thumb:

 

[catahoula]

Ballcock shank washers work real good to keep your D-rings centered and quiet.
http://m.lowes.com/pd_247810-143-PP835-50L_0__?productId=3366732

I was going to comment on that.

 

[OverlanderJK]

Ballcock shank washers work real good to keep your D-rings centered and quiet.
http://m.lowes.com/pd_247810-143-PP835-50L_0__?productId=3366732

I have 12 of them but I'm not strong enough to get them to fit in. :doh:

 

[Moochie]

I have 12 of them but I'm not strong enough to get them to fit in. :doh:

Maybe you need some lubrication?

 

[OverlanderJK]

Maybe you need some lubrication?

Could be. It's really tight. :crazyeyes:

 

[IBeHeWhoIsJoshua]

Since people have asked here are a few pics of the trim.


I need to pull them out another 1/4 - 1/2 an inch when I get my mud flaps, that's the reason for them still not being flush.

Thanks for posting

 

[JKbrick]

Day star only has 3/4" spacers and I like the red but my d rings in the EVO rears are 7/8", have to trim them I guess

 

[catahoula]

Day star only has 3/4" spacers and I like the red but my d rings in the EVO rears are 7/8", have to trim them I guess

I think my d rings are 3/4 with 7/8 pin. Not sure could not find specs.

 

[JKbrick]

I bought the rugged ridge ones

The spacers are cheap, I can find someone who will want them if I can't make them work

 

[catahoula]

I bought the rugged ridge ones
View attachment 48000
The spacers are cheap, I can find someone who will want them if I can't make them work

Yeah mine are 3/4" rugged ridge. Came with recovery gear pack 15104.25. Daystar kit is KU71074RE. I measured and they are 7/8" I think you will be fine no trimming.:thumb:

 

[Rccrwlr]

I think I want to figure out how to go back to this type of bumper




1979 Jeep CJ5 - rccrwlr
2008 Jeep JKUR - pheartmtngot

 

[catahoula]

I think I want to figure out how to go back to this type of bumper

<img src="http://wayalife.com/attachment.php?attachmentid=48034"/>

1979 Jeep CJ5 - rccrwlr
2008 Jeep JKUR - pheartmtngot

Lol! I remember those.

 

[JKbrick]

Thanks for measuring them

 

[catahoula]

Thanks for measuring them ?dc4d

No problem.

 

[H8MUD]

Just removed the bumper on mine a couple days ago. Also added the EVO shackles. The hitch was rusted on the surface to took it off and going to blast the rust off and repaint, then back on.

 

[catahoula]

Just removed the bumper on mine a couple days ago. Also added the EVO shackles. The hitch was rusted on the surface to took it off and going to blast the rust off and repaint, then back on.

Looks good!

 

[904Jeep]

wish evo made a plate like this with thier logo or something stamped or cut into it to compliment their d-ring sets.

Pretty much all of EVO's stuff is all about function over form and really, there is no function for something like this. But hey, that's just me.

Looks like EVO already has a bumper cover in the works. Taken from their Facebook page.

 

[H8MUD]

^^^ Wonder when the crossmember cover and cost will be available.