What was done to your rig this week?

This is my next mod! Easy installation?

Yep, very easy. Sway bar is held on by four bolts to frame of jeep. Disconnect end links, the four bolts and sway bar will be free. It helps to have two jack stands to hold new bar in place while bolting up. Also, the rubi swaybar I picked up didn't come with the mounts attached so I had to slide them off my old one. Santa is bringing the EVO manual disconnect. I can't wait. I hated dealing with the quick disconnects. Hoping this is going to be a much better set up.
 
Installed my Dynomax Evolution competition exhaust. And proceeded to put a dent in it the next day. :rock:



image-2549908740.jpg


Thanks to Chris (2012jkfng702) for the use of his garage and tools at my home away from home!



image-1117809539.jpg

Also a big thanks to him for sandblasting and repainting my rigid light brackets. :thumb: They were looking pretty sad!
 
Last edited:
Installed Dominion Offroad's NEW PRODUCT on my rig today. They are a Jack Mounted accessory kit from JeepSwag. Thanks again to Brett for letting me get my hands on these first. They work great and allow me to carry more gear, which is invaluable to me since I have a 2door. Here are some pics.


View attachment 6546
Looks great, but I hope you're already married. :yup:
 
New Front bumper, sliders and fender flares

Just picked up my ACE Engineering and Fab front bumper, sliders and wide fender flares! I can't wait until the rear bumper is done!

ACE Engineering and Fab Front Stubby w/Stinger, ACE Rock Sliders and ACE Wide Tubular Fender Flares
ACE1.jpg


ACE2.jpg


ACE3.jpg


ACE4.jpg

Thanks AJ, and the ACE Team for your awesome customer service and support!

For more pics, check out my album.
 

Attachments

  • IMG_5377.jpg
    IMG_5377.jpg
    73.6 KB · Views: 786
Last edited:
slowz3r said:
I Like, bookmarked for future reference.:2thumbsup:

Thank you. They are really affordable and work really well. I am doing some testing for Brett since the mounts are originally designed to work with the 4door Hi-Lift roll bar mount.

nmwranglerx said:
Nice looking setup you got there :thumb:

Thanks!!

Robar said:
Looks great, but I hope you're already married. :yup:

Yes, sir.... The shovel and axe keep her honest.... Muahahahaha
 
Okay finally a weeks long project in the making. Bench work, finding parts and time... Frank The Tank now has On-Board Air!!



image-106195010.jpg



image-1804734834.jpg



image-2431503972.jpg



image-3347373810.jpg

Also installed this new (to me) PSC tramp stamp get rid of that ugly vent.



image-2685877704.jpg
 
Last edited:
MTG said:
Looks good Frank! :thumb:

I like the coupler on the inside of the jeep.

Thank you sir! One on each side so I don't have to yank the air hose, just disconnect and switch couplers.
 
Installed new interior LEDs lights, got them from Northridge 4x4! Nice and bright!
 

Attachments

  • image-1478335932.jpg
    image-1478335932.jpg
    377.8 KB · Views: 846
Ford 8.8 install

Recently bought a ford 8.8 for the rear end. I have ordered all new axles brake kits and brackets to fit. Stoked for the out c0me. Pictures to follow.
 
Started a big project with my boys. Basically, a complete build of the Jeep :)

First toys - Metalcloak bumpers! Oh, and BTW - the girls are not mine :) Jeeps just attract all the neighborhood kids!! Free labor!

Rear bumper:

IMG_0013.jpg

IMG_0048.jpg

IMG_0024.jpg

IMG_0060.jpg


Started the front tonight...

IMG_0084.jpg
 
Majik said:
Started a big project with my boys. Basically, a complete build of the Jeep :)

First toys - Metalcloak bumpers! Oh, and BTW - the girls are not mine :) Jeeps just attract all the neighborhood kids!! Free labor!

Rear bumper:

<img src="http://wayalife.com/attachment.php?attachmentid=6691"/>

<img src="http://wayalife.com/attachment.php?attachmentid=6694"/>

<img src="http://wayalife.com/attachment.php?attachmentid=6695"/>

<img src="http://wayalife.com/attachment.php?attachmentid=6692"/>

Started the front tonight...

<img src="http://wayalife.com/attachment.php?attachmentid=6693"/>

Free labor/child labor..... Eh what's the difference? LMAO jk.... looks great!
 
10frank9 said:
I am starting this thread cause I saw it on another forum (JKF). I realize not everyone on WayaLife has a Jeep but I thought it would be cool to see what the WayaLife community is doing to their rigs. Post up, stories or pictures of what you've done to your rig recently.

I just finished putting on some EVO rock skins on my rig, The Downeaster Alexa.

<img src="http://wayalife.com/attachment.php?attachmentid=3499"/>

<img src="http://wayalife.com/attachment.php?attachmentid=3500"/>

Nice! I really that look.
 
Just finished installing the teraflex hinged carrier. Pretty easy to install following their video on youtube. I can't wait to put my 35 on it tomorrow ! :)

IMG_2272.jpg
 
Top Bottom