So I learned another reason to test fit parts before painting.. I went to install the Rock Hard harness bar a few weeks ago that I had painted this past fall, and when fitting it I ran into an issue I didn't notice before paint. The passenger side plate was off a 1/2"!
Unfortunately, there wouldn't be enough pinch seam if I were to drill the holes the way it came, so I gave Rock Hard a call. I spoke with Jason over there, and after a brief explanation and a quick email, he shipped another one out and I received it a few days later. I was very impressed with how quickly they corrected the issue, and would highly recommend their products. I was able to get the bar installed tonight, and hopefully will find some time this weekend to paint since the weather might be in the 60's.