Show off your diy jeep accessories

Hobolobo

New member
I'm working on making a set of rocker guards out of an old diamond plate toolbox, and i thought it would be kinda cool to see what accessories others have made for their beloved jeep. Ill post pics of mine whenever i get back to my shop.
 
Here are a few items I have built so far. Currently working on a set of EVO inspired Rock Sliders.
High lfit Jack Mount
093.jpg
Engine / Tranny Skid Plade
IMG_0251.jpg
EVO Inspired Rear Tow Mounts
IMG_0304.jpg
Rock Rails
IMG_1019.jpg
IMG_1022.jpg
 
Yes to take up the difference in space I used washer on one side. As for the big hole that I drilled out, my father told me to drill it out using a hole saw. I thought at first he was nuts but it worked like a damn in the drill press. Used a 3/4 bi-metal hole saw and it cut through it faster than any bit I would have had. I have always likes to build stuff it I can, living in the far north gretting stuff up here is very expensive so you learn to be creative.
 
Made a bracket to have my hydro assist push toward knuckle instead of middle of tie rod.
2B3E7A31-9BEA-48D3-ADA5-5E5A867950C5-17460-00000C3B66D46A2B.jpg

Skinned my gas tanks with some extra steel plate. Was my first attempt at welding!!
DSC_0583.jpg
 
ImageUploadedByWAYALIFE1376585987.524141.jpg
Here's the rear bumper and tire swing I made. Along with the mud flaps I had to make after getting a ticket. The mud flaps make my jeep look like it has a mullet.
 
I will try to grab some pics. I am no longer running it, it worked with the hard top but not the soft top. I have given it to my son who only runs the hard top. It is a very simple design, I got the idea off jeepswags web site.
 
Made some more progress on my rock sliders. I've got a buddy with a great shop and mad skills, and he has a cnc plasma torch too, I used one of wol's jk stickers for a design on the ends, hope that's ok Eddie.ImageUploadedByWAYALIFE1377090608.391248.jpgImageUploadedByWAYALIFE1377090637.356141.jpg
 
Got my rock sliders done, my buddy did an awesome job welding and powder coating them, then I went to the trail.ImageUploadedByWAYALIFE1378213854.604445.jpgImageUploadedByWAYALIFE1378213892.134046.jpg
 
Top Bottom