PRESS RELEASE : Rugged Ridge New JK XHD Rock Sliders w/Integrated Steps

wayoflife

Administrator
Staff member
Hey everyone, I just wanted to share the following press release I got from Rugged Ridge. As you can see, it's for their all new JK XHD Rock Sliders with integrated steps. Check it out and let us know what you think of them :cool:

RUGGED RIDGE ANNOUNCES NEW XHD ROCK SLIDERS WITH INTEGRATED STEPS FOR 2007-2016 JK JEEP WRANGLER
New Design Provides Maximum Protection for Vulnerable Rocker Panels and Pinch Seams

Suwanee, Ga. (February 23, 2016) – Rugged Ridge®, a leading manufacturer of high quality Jeep®, truck and off-road accessories, today announced the introduction of its new XHD Rock Sliders for the 2007-2016 Jeep Wrangler JK, designed to provide maximum protection for the Jeep’s most vulnerable points – the lower rocker panel and pinch seam.

The innovative one-piece design is precision manufactured from CNC-laser cut 3-mm steel plate and finished with a tough black textured coating. Each Rock Slider also features an integrated four-inch step to help making climbing in and out Jeeps easier, especially with lifted vehicles. The Rock Sliders are designed to function with most aftermarket and stock fender flares.

Easy to install, the XHD Rock Sliders give Jeep owners the option to mount them without drilling into the vehicle body, or for the ultimate in protection, secure using heavy duty rivnuts (drilling required). To protect your vehicle's finish, rubber gaskets are utilized to cover and protect the paint and body panels along the door sill areas.

“You can never have enough protection for your Jeep, especially when it comes to off-roading,” said Chris Kudika, Product Engineer at Omix-ADA. “Our new XHD Rock Sliders are engineered to fit the rocker section of your Jeep like a glove, conforming to the factory contours and providing maximum off-road protection without sacrificing ground clearance.”

Rugged Ridge XHD Rock Sliders for two- and four-door JK Wranglers are available online, with an MSRP starting at $853.99.

Rugged Ridge XHD Rock Sliders Installed 2-Door- High Res.jpg

Rugged Ridge XHD Rock Sliders Installed 4-Door- High Res.jpg
 
I like the way they look, but do they attach to the frame at all? Didn't sound like it.
 
These are held in place with your existing Body Mount bolts, and further secured with 4 smaller bolts to the sides.

Installation Instructions (PDF Document).

1. Clean surface of rocker panel to ensure its is free of dust, dirt, and debris.

2. Remove the 2 body-mount bolts from one side of the vehicle using an 18mm Socket Wrench.

NOTE: If body mount bolt spins but does not unthread, use a prybar to apply downward force on top of large washer.

Only remove body mount bolts from one side of the vehicle at a time.

Vehicle is on flat, level surface, in park, with emergency brake engaged. Do not attempt to move the vehicle when body mounts are removed.

4. Re-apply blue thread locker and re-install the 2 body mount bolts from step 1. Use a torque Wrench to tighten body mount bolts to 80 ft/lbs.

Repeat steps 1 - 4 for other side of vehicle.

11504.17-1.jpg
11504.17-2.jpg
11504.17-3.jpg
 
Last edited:
These are held in place with your existing Body Mount bolts, and further secured with 4 smaller bolts to the sides.

Installation Instructions (PDF Document).

1. Clean surface of rocker panel to ensure its is free of dust, dirt, and debris.

2. Remove the 2 body-mount bolts from one side of the vehicle using an 18mm Socket Wrench.

NOTE: If body mount bolt spins but does not unthread, use a prybar to apply downward force on top of large washer.

Only remove body mount bolts from one side of the vehicle at a time.

Vehicle is on flat, level surface, in park, with emergency brake engaged. Do not attempt to move the vehicle when body mounts are removed.

4. Re-apply blue thread locker and re-install the 2 body mount bolts from step 1. Use a torque Wrench to tighten body mount bolts to 80 ft/lbs.

Repeat steps 1 - 4 for other side of vehicle.

View attachment 189748
View attachment 189747
View attachment 189750

The same way the rubi rails are mounted. It looks to be a rubi rail that is a little wider, in theory.
 
Top Bottom