I thought some of the member who purchased 2013's got lucky and noticed their pinch seam was already trimmed at the factory. Isn't yours a 2013? Anyway, prime first then paint.:thumb:
I thought some of the member who purchased 2013's got lucky and noticed their pinch seam was already trimmed at the factory. Isn't yours a 2013? Anyway, prime first then paint.:thumb:
I read that post too, but I have a 2013 JKUR and the seams were not trimmed. Mine was delivered in December and I think the guy who posted that just got his in Feb; maybe they started doing that later, or 2 doors have it trimmed but not 4 doors? :idontknow:
I was surprised at how little I needed to trim for 37's though (Nitto TG's). While fully stuffed there was still an inch to spare in front of the rear tires. I just rounded the corner off. There is only about 1" diameter of the foamed area exposed.
Dave
Noone has an issue with the rear most corner of the rear pinch seam? That is where my problem lies
I read that post too, but I have a 2013 JKUR and the seams were not trimmed. Mine was delivered in December and I think the guy who posted that just got his in Feb; maybe they started doing that later, or 2 doors have it trimmed but not 4 doors? :idontknow:
I was surprised at how little I needed to trim for 37's though (Nitto TG's). While fully stuffed there was still an inch to spare in front of the rear tires. I just rounded the corner off. There is only about 1" diameter of the foamed area exposed.
Dave