My way to fast build of Oscar

[dillard09]

<img src="http://wayalife.com/attachment.php?attachmentid=162561"/>

More pics coming soon.

Can't wait to see these go in! I know your chomping at the bit! Good luck. I hope it goes smooth for ya.

 

[thardy]

Can't wait to see these go in! I know your chomping at the bit! Good luck. I hope it goes smooth for ya.

I've been told the front is in and they were working on the rear.

 

[Grubbicon]

I've been told the front is in and they were working on the rear.

The front is in and the rear is pretty much out.

 

[dillard09]

Very nice! How do they compare to the stockers?

 

[Grubbicon]

Very nice! How do they compare to the stockers?

They are definitely much beefier then stock. I can say that pr44 housing is much bigger then my rubi housing.

The rear 60 is in place.

 

[dillard09]

They are definitely much beefier then stock. I can say that pr44 housing is much bigger then my rubi housing.
<img src="http://wayalife.com/attachment.php?attachmentid=162576"/>
The rear 60 is in place.

Very nice. They look awesome. But quit laying down on the job and get back to work!

 

[OscarMike2.0]

Finally got some time to post up some pics. I have ran into a rear trac bar problem where the stock one hits the massive diff and that has become the stopping point for the night. Front is on the ground and just needs to be torqued and the front driveshaft installed.

Want to say thanks to everybody who came out today and helped. Scrambler, Trailless, HHunter050, and Grubbicon thanks again!

I hope to get everything finished tommorow and on the ground.

 

[OscarMike2.0]

 

[OscarMike2.0]

Can't wait to see these go in! I know your chomping at the bit! Good luck. I hope it goes smooth for ya.

Thanks I appreciate it. its gone semi smoothly. A few hiccups here and there but overall pretty well other than the rear tracbar issue

 

[Grubbicon]

Very nice. They look awesome. But quit laying down on the job and get back to work!

Lol I was falling asleep at that point. Glad to be home and in bed now.

 

[jango]

SO COOL!! Wish I was there to help!!!! Hope the last issue gets resolved soon.

 

[OscarMike2.0]

SO COOL!! Wish I was there to help!!!! Hope the last issue gets resolved soon.

Thanks man. I just got the air line routed, connected and wired. The front end is now torqued and all it needs is a driveshaft. I also routed the rear air line as well.

 

[OscarMike2.0]

 

[OscarMike2.0]

 

[13_gecko_rubi]

Did you get the rear track at issue figured out? I run the factory one on my pr 60 rear. Have the EVO pr60 raised track bar bracket. It's tight but clears by several mms.

 

[longarmwj]

Damn Will that's one large thick shaft you have there

 

[OscarMike2.0]

Did you get the rear track at issue figured out? I run the factory one on my pr 60 rear. Have the EVO pr60 raised track bar bracket. It's tight but clears by several mms.

I still have the problem but ill probably just order a new bracket tommorrow.

 

[OscarMike2.0]

Heres some more pics. I got the jeep on all fours thanks to Grubbicon and GR8WHITE. Im getting the driveshaft cut down tmrw.[

 

[thardy]

Heres some more pics. I got the jeep on all fours thanks to Grubbicon and GR8WHITE. Im getting the driveshaft cut down tmrw.

I thought you were waiting on getting the axles installed before getting the rear driveshaft?

 

[OscarMike2.0]

I thought you were waiting on getting the axles installed before getting the rear driveshaft?

I explained this in an early post but 4wp accidenly ordered both driveshafts not just the front as I had asked and are going to cover the cost to cut down the rear one