Just placed order for aluminum evo corners

[utiadam]

Well I just placed my order for the aluminum evo corners and the evo mud flap kit from Northridge. I really want to do the ORO Lite DOTs but I'm not sure how much modification is required. I found a picture of it done online but not sure if they are a member here.

If not those I would be interested in these lights that I think a few members here have done. I believe JAGS is one.


Any info on either one would be appreciated. Also info on required resistors please

 

[utiadam]

I think I found the second set of lights on Amazon and the load resistors. I used the link JAGS provided to eBay and then found all the stuff on Amazon.


I may stick to a combo that I know for sure works and is about 1/3 the cost.

 

[K.D.C.H]

When you get the aluminum covers in please post up some pics. I'm interested to hear your thoughts on them and if the difference in weight is worth the trade off for strength over the steel ones

 

[utiadam]

When you get the aluminum covers in please post up some pics. I'm interested to hear your thoughts on them and if the difference in weight is worth the trade off for strength over the steel ones

I definitely will! I'm wanting to leave them bare aluminum with my billet silver.

My 50" light bar mounts are bare and they blend in pretty nice.

 

[JKJody]

The aluminum ones are incredibly light and worth it. I posted the pic so you can see them raw to get an idea on your billet. I know its a shitty comparison with my anvil but...

 

[utiadam]

View attachment 113017
The aluminum ones are incredibly light and worth it. I posted the pic so you can see them raw to get an idea on your billet. I know its a shitty comparison with my anvil but...
View attachment 113018View attachment 113019

Thank you for the pictures! It looks like I'll need to do some sanding but nothing major. Here is what I did to my poison spider mounts:

 

[SFNick]

Wish They had these out when I was shopping around. Looks great!

 

[JKJody]

Thank you for the pictures! It looks like I'll need to do some sanding but nothing major. Here is what I did to my poison spider mounts:
View attachment 113020

Ok i didnt notice them in your first pic. Looks good.

 

[pedroj14]

Subscribed! to see more pics and comments on the aluminum corners

 

[JKJody]

Thank you for the pictures! It looks like I'll need to do some sanding but nothing major. Here is what I did to my poison spider mounts:
View attachment 113020

Clear out your inbox utiadam. It wont let me send anything to you.

 

[utiadam]

Clear out your inbox utiadam. It wont let me send anything to you.

Done, please try again

 

[utiadam]

These just showed up today

 

[RMC2]

Nice .

 

[ak49]

Well I just placed my order for the aluminum evo corners and the evo mud flap kit from Northridge. I really want to do the ORO Lite DOTs but I'm not sure how much modification is required. I found a picture of it done online but not sure if they are a member here.
View attachment 112975
If not those I would be interested in these lights that I think a few members here have done. I believe JAGS is one.
View attachment 112976

Any info on either one would be appreciated. Also info on required resistors please

The second picture is my jeep. As already stated, they are the Maxxima lights model M85415R

 

[utiadam]

The second picture is my jeep. As already stated, they are the Maxxima lights model M85415R

Awesome jeep! I have lots of pictures saved of it

I ordered the M85416R I believe.

 

[ak49]

Awesome jeep! I have lots of pictures saved of it 

I ordered the M85416R I believe.

I think you'll like them. I have no complaints with them and the price was substantially cheaper than ORO.

 

[Strike Force Zebra]

Adam, I got my lights a few days ago. Thought you might like this idea. There is no real "seal" between the lights and the metal( or aluminum) so I made these.

 

[Strike Force Zebra]

Another thing I likes about them is I don't think much( if any) sheet metal needs done where the other light holes won't line up!!

 

[utiadam]

Adam, I got my lights a few days ago. Thought you might like this idea. There is no real "seal" between the lights and the metal( or aluminum) so I made these.View attachment 113492View attachment 113493View attachment 113494

Good idea! Where is the foam from? Do you have pictures of the wiring at all?

 

[Strike Force Zebra]

Michaels..... A hobby store my wife always goes to. I don't have pictures of the wiring. PV explained it pretty good already.