JK 4.0 HO Swap for real.

Hey guys. I'm new here and this is my first post so please bare with me. I killed my 545rfe in a lake at my local quarry. Took on 3 litres of sandstone lake water through the stupid vented dipstick tube. Managed to drive 23 miles home and once I turned off the jeep and started it again it wouldn't move. Transmission destroyed. I hated the crd motor anyway so sold it in perfect working order. So now comes the good stuff. Im swapping in the legendary 4.0 fully rebuilt with an AW4/241 combo. Do I have your attention?

Regards
Ollie

Sent from my GT-I9300 using WAYALIFE mobile app
 
Hello and welcome to the forum.

you're swapping out a CRD?? i'd love to have a CRD in my rig. I hear in 2016 (2015 model) they will finally offer one in the USA

But I guess your CRD is Mercedes? and that's as common over there as the 4.0 is here. Will be interesting to see how It works out.
 
CRD and transmission removed.

Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393104979987.jpg
    1393104979987.jpg
    106.5 KB · Views: 1,485
Well the CRD stinks. Only got 22 imperial mpg with 35's on 4.10 gears. My 91 2 door xj 4.0 HO/AW4 with 244,000 miles on it rollin on 33's with 3.55 gears gets 27 imperial mpg. Plus diesel is 10 pence (16 cents) per litre more in England.

Sent from my GT-I9300 using WAYALIFE mobile app
 
AW4 mounted and bare block test fit. Loads of space.
Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393105615171.jpg
    1393105615171.jpg
    108.7 KB · Views: 1,471
Motor mounts removed and frame cleaned ready for new mounts.

Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393105768447.jpg
    1393105768447.jpg
    87.6 KB · Views: 1,465
  • 1393105810486.jpg
    1393105810486.jpg
    60.5 KB · Views: 1,446
New motor mounts.

Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393106003041.jpg
    1393106003041.jpg
    73.4 KB · Views: 1,447
  • 1393106032861.jpg
    1393106032861.jpg
    74.2 KB · Views: 1,440
Motor mounts welded in and painted. Rebuilt engine mounted up.

Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393106191411.jpg
    1393106191411.jpg
    83.8 KB · Views: 1,050
  • 1393106220427.jpg
    1393106220427.jpg
    58.6 KB · Views: 1,041
  • 1393106241854.jpg
    1393106241854.jpg
    66.4 KB · Views: 1,048
Please excuse the scruffy PAS lines. They will be replaced and only on there to keep dirt out of the pump.

Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393106492110.jpg
    1393106492110.jpg
    102.7 KB · Views: 1,058
"Laissez Les Bon Temps Roulez"!
"Let the good times roll baby", or something like that! Great project!:thumb::thumb:
I think the 4.0L HO may be the best engine Jeep has ever put in any of their products. Period!!My two Pence!
 
Last edited:
I had the 4.0 in two of my past Jeeps and I loved that motor. Hell, I still love to hear the sound of the 4.0 cranking before start-up! Personally if I were going to swap something into my JK, I would look forward and go with a modern HEMI or LS engine. However I applaud you, your creativity, and ingenuity; I am watching this build with bated breath.
:clap2:
 
Subscribed! Even if this is backwards to what I would like to do (put a diesel INTO a JK :eek:) I'm looking forward to the 4.0 install. Looks good so far!
 
Well I have had a few common rail diesel engines and they do not come close the the 4.0 for reliability and durability. When you factor in the cost of parts for a modern diesel and the marginal fuel savings they really are not worth it. Now the cummins 5.9 or any other large capacity diesel is fine but the CRD/545rfe was a gutless combo. Wouldn't hold a gear and just felt mismatched. Anyway what kinda jeep has a weeny Italian diesel under the hood? Its American! It needs an american motor.

Sent from my GT-I9300 using WAYALIFE mobile app
 

Attachments

  • 1393132061572.jpg
    1393132061572.jpg
    95.6 KB · Views: 972
Top Bottom