Evo tire carrier w/ rotopax

Crystaliner

Doesn't know shit about wheeling
Just another way to install the rotopax system, if your license plate is in this location



IMG_2433.jpg

Used AXIA alloys mounts 1.75 mounts. Came w/hardware also.


IMG_2436.jpg
IMG_2437.jpg
IMG_2438.jpg



Found these clamps at the local offload show but you can find them online as well

IMG_2439.jpg



Had to drill 2-1/4 holes in the plate 13'' apart.

When I used the predrilled holes the plate was off centered.

IMG_2442.JPG

Clears the license plate light by 1/2 inch

IMG_2443.jpg

What makes this nice...Im still able to reach behind the tire to remove the plate w/o the container on of course.

All in all it was easy...
 
Last edited:
Rearview camera mount optional? ;)
LOL, not as if you can see much with these carriers anyways.


View attachment 257314


I do have to say I like the way that mount won't let the can or cans move down the bars on the carrier. I have two individual ones I picked up that will allow that if you don't make sure they're good and tight.
 
Last edited:
Love this idea, was trying to find a way to mount that plate My carrier, and this is perfect, thanks for sharing!


Sent from my iPhone using WAYALIFE mobile app

The clamp Allows the tire to snug up against the carrier like there was nothing there.
The clamp looks to be tumbled deburred before anodize and has smooth edges all around




Sent from my iPhone using WAYALIFE mobile app
 
Last edited:
Just another way to install the rotopax system, if your license plate is in this location



View attachment 257309

Used AXIA alloys mounts 1.75 mounts. Came w/hardware also.


View attachment 257310
View attachment 257311
View attachment 257312



Found these clamps at the local offload show but you can find them online as well

View attachment 257313



Had to drill 2-1/4 holes in the plate 13'' apart.

When I used the predrilled holes the plate was off centered.

View attachment 257314

Clears the license plate light by 1/2 inch

View attachment 257315

What makes this nice...Im still able to reach behind the tire to remove the plate w/o the container on of course.

All in all it was easy...

That looks like a good idea, especially if you are going to stack two cans.


Sent from my iPhone using WAYALIFE mobile app
 
Top Bottom