EVO 1/4 Pounder with fog lights

Krieger

Member
So I've been getting some requests for info on how I ran the Dually's as fogs on the EVO bumper. Well it was super easy
When I added the bumper I still wanted to keep the fog lights. So after some thinking this is what I came up with.
ImageUploadedByWAYALIFE1386730406.432509.jpg
I used all the hardware that came with the Dually's ImageUploadedByWAYALIFE1386730477.144051.jpg
ImageUploadedByWAYALIFE1386730505.407655.jpg
All I did is add a large washer with a hole in the middle just a little bigger.than the bolt that way it won't pull through.
Add a lock washer and your good to go.
ImageUploadedByWAYALIFE1386730695.388755.jpg
The view from underneath.
ImageUploadedByWAYALIFE1386730737.393954.jpg
I hooked the lights up to the stock fog light wires and added a resistor to keep it from flickering, and there you have it
Fog lights on a EVO 1/4 pounder bumper. Cheers!
 
Wow that IS super easy. Thanks for posting this up Krieger. Next mod is a 1/4 pounder with some duallys so this will come in handy. 👍
 
I have been looking at this for a while and might do it for no other reason then I like it.

One thing that swayed my decision was
I attempted to use the high lift using the T in the bumper and with the stinger on the bumper the jack didn't fit. So why not use that T for something else.
 
Wow that easy?! And I just had those rigids delivered to my house today! Well I know what I'm doing this weekend!!😄
 
Top Bottom