Doing a little homework it appears that my drivers side door actuator is shot. Has anyone removed and replaced this and done a write-up on it? I disassembled the outer cosmetic panel but behind it is another panel (that has the window regulator attached to it) with about 10 hex bolts holding it down to the door. I removed these bolts and it appears that there is something else holding things back. I didn't want to break anything so buttoned everything back up and now looking for direction on the correct way to remove. While I'm posting, is it possible it's something other than the actuator? The vehicle is a 2010. All the other doors (all two of them - passenger side and lift gate) open and lock with the remote.