DIY Roof Rack Questions

Sgt_USMC

Active Member
I have been playing around with the idea of making a roof rack that attaches to my current cross bars. It’s main use would be for lights, an axe and shovel. I’m thinking aluminum square stock bolted to the cross bars. I don’t want it above the bars. The wire routing I would like to run the wires inside the aluminum, and have a great idea from a buddy for going through the roof. Here’s what I have so far. Any input would be greatly appreciated! D74D9544-1DF5-4C1A-9C3D-C5CE34F465DC.jpeg
 
Looks like you have a good plan, welding your alum is a good idea, sometimes I add a run off/on tab of alum before and after the weld that can be removed to keep the edges from burning off.
Lets se some pictures
 
Top Bottom