CJ buggy build

Added some supports going from the shock hoops to the section of frame with the engine mounts. Should help stiffen everything up front when I cut out the unneeded part of the old frame. Started plumbing the transmission cooler lines. I wanted to make each line out of a single piece of tubing. Got a little too short on this line. Hopefully the next on I can make the way I want it.

Those shock hoops look stout! Builds looking great.


Sent from my iPhone using WAYALIFE mobile app
 
Temporarily mounted the orbital valve and steering column. I'm happy with where the valve is but the column might be a little too high. I'll have to make a new bracket.
 

Attachments

  • 20180530_205924.jpg
    20180530_205924.jpg
    76.4 KB · Views: 104
  • 20180530_205934.jpg
    20180530_205934.jpg
    124.5 KB · Views: 113
Reinforcing the frame to role cage with some more tubing.
 

Attachments

  • 20180603_161301.jpg
    20180603_161301.jpg
    116.5 KB · Views: 119
  • 20180603_155248.jpg
    20180603_155248.jpg
    138.2 KB · Views: 122
  • 20180603_155332.jpg
    20180603_155332.jpg
    138.5 KB · Views: 121
  • 20180603_163557.jpg
    20180603_163557.jpg
    87.8 KB · Views: 121
I made and welded in some fuel cell mounts. Drilled and tapped mounting holes
 

Attachments

  • 20180614_121753.jpg
    20180614_121753.jpg
    102.3 KB · Views: 111
  • 20180614_135113.jpg
    20180614_135113.jpg
    83.7 KB · Views: 117
Got a new battery box and battery. Getting them mocked up.
 

Attachments

  • IMG_20180815_200800_804.jpg
    IMG_20180815_200800_804.jpg
    144.2 KB · Views: 90
Welded a plate to the roll cage and made it so I can remove the battery box. Bolted in the battery box and put I my new battery
 

Attachments

  • 20180816_202110.jpg
    20180816_202110.jpg
    71.5 KB · Views: 95
  • 20180816_202657.jpg
    20180816_202657.jpg
    68.8 KB · Views: 91
  • 20180816_210234.jpg
    20180816_210234.jpg
    112.7 KB · Views: 96
The steering column was too high. I took a piece of 2x3 tubing and made a spacer to drop the wheel. Welding kinda sucks with a splint on...lol
 

Attachments

  • 20180822_193714.jpg
    20180822_193714.jpg
    93.9 KB · Views: 118
  • 20180822_195328.jpg
    20180822_195328.jpg
    112.2 KB · Views: 120
  • 20180822_194026.jpg
    20180822_194026.jpg
    63.1 KB · Views: 96
Parts are coming in. Brake and steering plumbing parts. Had enough to start on the rear axle, still waiting for the rest to show up.
 

Attachments

  • IMG_20180830_150752_416.jpg
    IMG_20180830_150752_416.jpg
    130.9 KB · Views: 124
  • IMG_20180830_150752_415.jpg
    IMG_20180830_150752_415.jpg
    181.9 KB · Views: 114
Power steering heat sink is mocked up. I used 2 pieces of 2" square tubing to make the mounts. They don't connect, only long enough to support the cooler, maximize air flow and cooling.
 

Attachments

  • 20180901_232700.jpg
    20180901_232700.jpg
    101.4 KB · Views: 107
  • 20180901_232927.jpg
    20180901_232927.jpg
    90 KB · Views: 106
Built some hydraulic lines and modified the orbital valve support bracket.
 

Attachments

  • 20180903_184927.jpg
    20180903_184927.jpg
    111.8 KB · Views: 92
  • 20180903_184921.jpg
    20180903_184921.jpg
    79.6 KB · Views: 96
  • IMG_20180903_201941_082.jpg
    IMG_20180903_201941_082.jpg
    131.5 KB · Views: 108
This build is insane! I don't know how I missed it .... Some serious Vision, Skill & Patience involved here.. F'n bad ass. Subscribed.
 
Got some work putting brake line clips on the trusses. Got the hydraulic lines routes through the front truss, pretty tight though.
 

Attachments

  • IMG_20180907_234347_052.jpg
    IMG_20180907_234347_052.jpg
    148 KB · Views: 90
  • IMG_20180907_234347_053.jpg
    IMG_20180907_234347_053.jpg
    164.4 KB · Views: 95
  • 20180907_233538.jpg
    20180907_233538.jpg
    97.4 KB · Views: 99
  • 20180907_233543.jpg
    20180907_233543.jpg
    96.5 KB · Views: 97
Top Bottom