RESURECTIONJK
Hooked
Hey all. For those of you running ARB switches without an SPOD or similar device. How and where are you mounting your ARB switches? Pillars are out because I’m running a sport cage. Looking for something simple. Any ideas?
Arb switch location
- Thread starter RESURECTIONJK
- Start date
boardsurfer
Active Member
Left of steering wheel, above the speaker grill is probably the most common spot. Where the factory Rubicon switches would be if you had them.
Omnifox
New member
Watching with interest.
I need to mount my new locker switches and I have been looking for ideas.
You seem to be missing a pedal there!
I need to mount my new locker switches and I have been looking for ideas.
You seem to be missing a pedal there!
Gadget
Caught the Bug
On a panel in front of the gear shifter, don’t have a picture handy, sorry. I’m sure somebody here does.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
fiend
Caught the Bug
Daystar makes a panel like that.
Gadget
Caught the Bug
I do believe that is the one I have, works great for me.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
JeepJeep75
New member
yes, you can put extra switches right next to your factory locker switches.Sent from my iPhone using WAYALIFE mobile app
OverlanderJK
Resident Smartass
Here’s what I made. CB was above the rear view when I ordered all the parts then I got a sport cage at the same time and my a pillar panel was full. 
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
BaddestCross
Active Member
That looks really good.
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
fiend
Caught the Bug
What are Sasquatch lights?
OverlanderJK
Resident Smartass
BaddestCross
Active Member
You don't have Sasquatch lights?!
View attachment 283711
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Attachments
Last edited:
fiend
Caught the Bug
OverlanderJK
Resident Smartass
fiend
Caught the Bug
No, but maybe I need some. [emoji848]
RESURECTIONJK
Hooked
Man I’m so glad I made this thread. Good info and even better entertainment. I needed that...
I'm assuming you have electric windows. If not, this may work for you. My JK came ordered with factory half doors, so no electric windows. I mounted my switches into the radio bezel before I had my SPOD. After I bought my SPOD, I sealed up the holes with epoxy, painted it with flat black spray paint, then hit it with some rattle can, Dupli-Color Bed Liner.
desertrunner
Hooked
A dremmil and some patients and mine turned out decent.
The wires behind the switches are a pretty tight fit but obviously plenty of people make it work just fine.
Sent from my SAMSUNG-SM-G890A using WAYALIFE mobile app
