37s on LJ Rubicon Axles

I’m far from an expert but the general consensus from everything I’ve read indicates 37s and TJ 44s won’t last if you actually wheel in places you need 37s. Most people point to the fact that the TJ 44s are actually just a 44 inner with a Dana 30 outer making 35s about the max.
 
Yeah, we are looking at that option too. But, with adapters and wheels, it’s still another $600.


2015 JKUR AEV JK350
1985 CJ8 Scrambler

I’d think if they were patient you could find a set of 5x4.5 steels for $200


Sent from my iPhone using WAYALIFE
 
Nobody really NEEDS 37's, but we all want them.

Until we have them for a while and fall down a rabbit hole and decide no, what we REALLY need is 40's

Are you mocking me!! Lol! I resemble that remark.


Sent from my iPad using WAYALIFE
 
37s are fine on tj’s. Just bad luck on the seal. I wouldn’t bother with anything more than regearing. 4.56 to 4.88 imo wouldn’t go higher they are NOT the same as jk 44s.
37s have gotten rare for a 15” and for the most part it’s either buy an over priced tire or get 17” wheels


Sent from my iPhone using WAYALIFE
 
Top Bottom