Daniel Partida
New member
Ok so kinda starting to pull some hair out, so bought some 37x13.50R17 Cooper Stt Pros and mounted on some ATX Slab beadlocks, tried to balance them with stick on weights at work with a Hunter tire balance machine, first one took about 40oz of weight and finally balanced, second one asked for 32oz on the first run, 12oz on a second pass and wanted to add even more on the third try so I stopped. That's way more weight that I've ever put on 37s, I think my last set of procomps took about 15 or 16oz on the worst one. Tried adding one of the wheels I still haven't mounted a tire to and added the ring and bolts and perty much balanced according to the machine, if throwing the beadlock on the machine to check its balance is a thing. So bad tires? Or maybe I'm installing them wrong? Always go in a back and fourth pattern to torque the rings down to 25ft-lbs according to ATX wheels bolt torque. And I'm doing probably 10 or more passes increasing in torque. Was also thinking on throwing one of the tires on a non beadlock wheel and seeing if it balanced or took alot less weight to balance then might be the beadlocks? Or my installation????...please help! don't have much hair left lol