epriev's latest activity

Rocky Mountain National Park.

And I borrowed an angle finder from work. The caster is at 0 degrees. But it steers straight and returns to center.

After 3 moderate to hard trails around Idaho Springs, CO, it wheels close to the Xterra, but better, even with smaller tires. The...

Is there an ASTM or SAI standard for determining tire size? How can all these companies get away with these size lies?

See below

In the 1st picture, is the driver's side with the UCA mounted with the spacer and the LCA with only the bolt. I tried clamping it and...

That would have made it worse.

I did not try to install again, but from the scratches, it looks like the LCA inner frame mount is hitting the brackets weld. The weld...

I started using these on my Nissan 350. I would swap between blue and colorless brake fluids after 2 or 3 track days. You can no...

Still looks low in the back. Also what would this cost to install and alignment? Offroad Warehouse/4 wheel parts quoted $1200 plus tax...

Eddie, your videos and guides are awesome. The rear lift went on so much faster. On the passenger rear uca frame bolt, I use needle...

Thanks. I was able to pry the mount open and remove the brake line. I hate using a grinder with cutting wheel in close & tight quarters.

Thank you for these guides. Finished the lift using this and the how to for beginners video.

One more question. On the front brake bracket attached to the LCA, instead of zip tieing it the LCA, would drilling out the mount to...