Zeon synthetic line install

xrocknrollx

New member
I have been trying to get the synthetic line through the drum for too long now. I broke the zip tie included after the loop was 25% through the drum, tried using my own zip ties and they also continue to break at the same position while being pulled.

Any tips that would help me get the line through the drum would be appreciated.
 
I haven't had a chance to work with a Zeon before but I do know what the drum looks like. Is it the rope is bunching up as you pulling it through?
 
I have been trying to get the synthetic line through the drum for too long now. I broke the zip tie included after the loop was 25% through the drum, tried using my own zip ties and they also continue to break at the same position while being pulled.

Any tips that would help me get the line through the drum would be appreciated.

It is an extreme pain in the ass. I finally got a heavy piece of wire and got it through. Just keep trying.
 
I have been trying to get the synthetic line through the drum for too long now. I broke the zip tie included after the loop was 25% through the drum, tried using my own zip ties and they also continue to break at the same position while being pulled.

Any tips that would help me get the line through the drum would be appreciated.

A piece of electrical wire will pull it through without breaking
 
Use a clothes hanger. Spend the time to get the kinks out of a "unbent" clothes hanger. Fold it into a "u" and then use that to pull the rope through. I tried numerous sizes of wire ties and even small gauge wire. All of them broke trying to pull he rope through. It's a PITA but the clothes hanger worked for me.
 
I just had the same problem installing my 10-s. Broke the cheap zip tie provided, so I used 2 HD zip ties and some saliva on the loop... slipped right through.
 
What a PITA they really shouldn't give you a zip tie. It was easy using a wire to pull it through.

Thanks for the advice.

IMAG0295.jpg
 
It is probably hard to see but I couldn't get it to fit the life of me so I had to use a little mechanical advantage with some pulleys and some 14ga copper wire... Zip tie lasted about two seconds. ImageUploadedByWAYALIFE1426365521.670045.jpg
 
Top Bottom