Where to tap the airline hole on the PR44

jorgelrod

jorgelrod

Hooked
I'm looking for the best place to drill and tap the hole for the locker air line on the PR44. Some pointers would be awesome as well as some pics

IMG_4781.jpgIMG_4781.jpg

Orange dot is where it would go according to Yukon but I'm open to suggestions, pics.


Sent from my iPhone using WAYALIFE mobile app
 
Dynatrac puts it here on top of that pad when they build theirs:

IMG_4781.jpg

Here's pics of mine, however, when I had the cover off, I didn't look closely at where the copper line goes into that spot. Being your cover is off, you should be able to shine a light in there and see how much room you have.

DSC04279.JPG

IMG_20161217_124741_523.jpg

IMG_20170209_155945_554.jpg
 
I just realized they put the ARB air collar on the other side of the carrier. Different spot, not sure if that matters.

EDIT: Also just realized that you don't have an ARB. What locker is that?
 
Last edited:
WJCO said:
I just realized they put the ARB air collar on the other side of the carrier. Different spot, not sure if that matters.

EDIT: Also just realized that you don't have an ARB. What locker is that?
Click to expand...

Mines a Zip Locker from Yukon, the collar on mine is actually on that side so I won't need to run the line over the ring gear


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom