Wheel size help

BRBWheelin

New member
I have a 2 door 2020 JL that I'm putting a Mopar 2" lift on. I have 33" Rubicon take-offs on it now but want to upgrade to BF Goodrich K02s in 35's when the lift is on. But I'm not sure if the Rubicon 17in x 7.5 wheels would be ok with 35's? Or if I'd need to move to bigger wheels. Note too that the wheelin I do is nothing crazy. More beginner type stuff. Hoping for some feedback. Thanks all!
 
I have a 2 door 2020 JL that I'm putting a Mopar 2" lift on. I have 33" Rubicon take-offs on it now but want to upgrade to BF Goodrich K02s in 35's when the lift is on. But I'm not sure if the Rubicon 17in x 7.5 wheels would be ok with 35's? Or if I'd need to move to bigger wheels. Note too that the wheelin I do is nothing crazy. More beginner type stuff. Hoping for some feedback. Thanks all!
I also have a 2-door JL with the Mopar 2" lift, but the Rubicon JL model. Also planning to upgrade to 35's but hoping for Nito this time. Check the tire manufacturer's recommendation for the tire you are looking at. Probably K02s would be ok (depending on tire width) but it seems that Nitto wants a wider rim (although 12" wide says 7.5" is the minimum). I think it is wise to optimize for the tire manufacturer's recommendations if feasible.
 
I also have a 2-door JL with the Mopar 2" lift, but the Rubicon JL model. Also planning to upgrade to 35's but hoping for Nito this time. Check the tire manufacturer's recommendation for the tire you are looking at. Probably K02s would be ok (depending on tire width) but it seems that Nitto wants a wider rim (although 12" wide says 7.5" is the minimum). I think it is wise to optimize for the tire manufacturer's recommendations if feasible.
Appreciate the feedback. Great advice to check the tire manufacturers recommendations.
 
Top Bottom