rinkishjk
New member
Nice! Slabs??
What was done to your rig this week?
- Thread starter 10frank9
- Start date
Nice! Slabs??
Redrubi1
New member
travislc72
New member
jmeredith
New member
A few accessories: tow hitch D-ring, new thimble for winch, and license plate mount that snaps into fairlead. Had to modify the mount so it would sit lower to clear my light bar and front camera. My two year old has his hand helping in a few pics
<img src="http://wayalife.com/attachment.php?attachmentid=15127"/>
<img src="http://wayalife.com/attachment.php?attachmentid=15128"/>
<img src="http://wayalife.com/attachment.php?attachmentid=15129"/>
<img src="http://wayalife.com/attachment.php?attachmentid=15130"/>
<img src="http://wayalife.com/attachment.php?attachmentid=15131"/>
Looks good!
JKAnimal
Caught the Bug
A few accessories: tow hitch D-ring, new thimble for winch, and license plate mount that snaps into fairlead. Had to modify the mount so it would sit lower to clear my light bar and front camera. My two year old has his hand helping in a few pics
View attachment 15127
View attachment 15128
View attachment 15129
View attachment 15130
View attachment 15131
What does your front bumper camera hook to? Interesting Idea.
I have never run a front license plate in the year I've had my Jeep. I drove to Destin FL and never had any issues so I haven't worried about it but I like your idea of clipping it to the fairlead. Does it stay at 70/80 mph? :thumb:
Holeshot
Banned
Pics? and what year is your jeep?
Cpfiremn
New member
For some reason I can't upload the pics from my phone, it has problems sometimes. I'm still trying to upload them. I have a 09 JKU 3.8
Cpfiremn
New member
I uploaded pics to jk forums under the writeup section. I did not do a writeup for the forum, but will be one on offroad.com in about a month.
SoCalDozer
New member
Got my dynomax competition system installed today finally!
Gibbo
New member
Was that system hard to fit? I wanted to fit one, but Dynomax told me it wouldn't fit the 2 door.
SoCalDozer
New member
The new one isn't designed for the 2 door. I used the 07-11 system which fits on both 2 and 4 doors from that year. The hangars are really close but I was able to make it work with one mount by twisting the rubber hangar. I am looking for some different rubber hangars that might work better but I was able to make it work. You can see the hangar in the pic
I also had 2 inches cut off the intermediate pipe and 1 inch cut off the tailpipe.
I also had 2 inches cut off the intermediate pipe and 1 inch cut off the tailpipe.
Gibbo
New member
Good for you. I bet it sounds great. I'll have to opt. for something like the rockcrawler system I guess. hope it still sounds as good.
SoCalDozer
New member
It sounds awesome. I would go for the competition system if that's what you want. Really isn't hard to make work at all. Exhaust shop would probably only charge 50 bucks to install it and put new hangars on.
OverlanderJK
Resident Smartass
I got an ARB tire repair kit for the low price of a slashed rear window.