What was done to your rig this week?

Andy5160

Andy5160

Hooked
WJCO said:
Wired up the winch. Pain in the ass. There's hardly any room on this new platform. Went between the air box and fender, barely. Pictures won't show shit, so I didn't take any.
Click to expand...
Were you able to hide any cables behind the winch ? With Evo Q Pounder i did not have any space between the winch and the grill.
 
WJCO

WJCO

Meme King
Andy5160 said:
Were you able to hide any cables behind the winch ? With Evo Q Pounder i did not have any space between the winch and the grill.
Click to expand...
Barely. Many zip ties so the wiring wasn't visible from the front view. And mainly so that the positive wire wouldn't have a chance to rub on anything. The warn winch plate puts the winch right next to the grill. Crazy tight space.
 
fiend

fiend

Caught the Bug
Found a crack in my front track bar mount. Welded it up. Also found the source of my constant CELs for evap system leaks and loose gas caps. Fixed that with some plastic tubing and JB Weld epoxy.
FC1A7A77-3F59-4561-A17D-045A1F649817.jpeg
 

Attachments

  • 8392A42E-4F69-470C-972B-6981329D91BE.jpeg
    8392A42E-4F69-470C-972B-6981329D91BE.jpeg
    142.3 KB · Views: 14
  • EBB950D3-02B8-4F69-9AFA-922E22EC85B3.jpeg
    EBB950D3-02B8-4F69-9AFA-922E22EC85B3.jpeg
    134.3 KB · Views: 19
  • D376402B-CF61-4064-A47B-ED6718771C53.jpeg
    D376402B-CF61-4064-A47B-ED6718771C53.jpeg
    105.6 KB · Views: 20
  • 070B1CD3-EFB7-41FB-9D81-0C3B7C3D027A.jpeg
    070B1CD3-EFB7-41FB-9D81-0C3B7C3D027A.jpeg
    113 KB · Views: 20
-AINOKEA-

-AINOKEA-

Hooked
Finally got around to installing the new spicer ball joints on the JKU. Actually a friend installed them for me. I don’t have any time anymore with a new baby, still working on my masters, and work. Glad this is finally outta the way though. Not sure how I’m ever going to grease the lower ball joints in the future.
 

Attachments

  • E912B7C6-F8C7-43E3-8305-DFF1860E784F.jpeg
    E912B7C6-F8C7-43E3-8305-DFF1860E784F.jpeg
    159.5 KB · Views: 18
  • 84738153-FC76-4108-A079-CC652262A81A.jpeg
    84738153-FC76-4108-A079-CC652262A81A.jpeg
    125.5 KB · Views: 18
jdofmemi

jdofmemi

Active Member
-AINOKEA- said:
Finally got around to installing the new spicer ball joints on the JKU. Actually a friend installed them for me. I don’t have any time anymore with a new baby, still working on my masters, and work. Glad this is finally outta the way though. Not sure how I’m ever going to grease the lower ball joints in the future.
Click to expand...
Looks like there may be room to thread that fitting out, and put in a 90 degree fitting, then use a needle point on it.
 
Hilop

Hilop

Caught the Bug
New JKS rear sway bar links. What length are you guys running with 4” Plush Rides? EVO and JKS recommendations are different from each other. Thanks
 

Attachments

  • 4E6C1EB0-13FC-4AB6-93D2-5BF7B0308B4A.jpeg
    4E6C1EB0-13FC-4AB6-93D2-5BF7B0308B4A.jpeg
    213.7 KB · Views: 10
Seahawkfan

Seahawkfan

Hooked
-AINOKEA- said:
Finally got around to installing the new spicer ball joints on the JKU. Actually a friend installed them for me. I don’t have any time anymore with a new baby, still working on my masters, and work. Glad this is finally outta the way though. Not sure how I’m ever going to grease the lower ball joints in the future.
Click to expand...
Looks like you could gain some room by turning the axle shaft and using one of these. https://www.amazon.com/Lincoln-Lubr...8BQPMWFZXXV&psc=1&refRID=ZZJWWP0A18BQPMWFZXXV
Snap44.png
 
Seahawkfan

Seahawkfan

Hooked
Hilop said:
New JKS rear sway bar links. What length are you guys running with 4” Plush Rides? EVO and JKS recommendations are different from each other. Thanks
Click to expand...
Pretty sure I'm just running the stock front on the rear with 4" plush rides. Not sure of the length.
 
jeeeep

jeeeep

Hooked
fiend said:
Found a crack in my front track bar mount. Welded it up. Also found the source of my constant CELs for evap system leaks and loose gas caps. Fixed that with some plastic tubing and JB Weld epoxy.
View attachment 362441
Click to expand...
which JB weld epoxy did you use? I thought I had fixed my small evap leak fixed but after 6mo it's back and I think on that same plastic portion
 
You must log in or register to reply here.
Top Bottom