What did Brown Santa show up with today..

ImageUploadedByWAYALIFE1388103901.437120.jpgImageUploadedByWAYALIFE1388103911.359322.jpg

Ats stabilizer (present for myself) and 5.13 Yukon gears (parents spoiled me)

They spend more on me for Xmas now that I'm 26 and have been out of the house for 5 years than they did when I was a kid
 
Got the Firestik and Teraflex mount on. Going to use Eddies write up and get the Cobra in tomorrow.

Sent from my SPH-L720 using WAYALIFE mobile app
 

Attachments

  • 1388126108734.jpg
    1388126108734.jpg
    87.7 KB · Views: 414
  • 1388126117161.jpg
    1388126117161.jpg
    51.5 KB · Views: 410
Waiting to install this bad boy. You don't realize how stout this thing is until you lift it up. This is one heavy ass bumper/stinger combo. 👍

ImageUploadedByWAYALIFE1388372369.859111.jpg
 
OverlanderJK said:
evo.

........
Click to expand...

I didnt realize that EVO made different type of stingers.....Or is that the same stinger???

You guys know the measurements of the bolt to flip the electric sway bar disconnect? I've been told in the past that I can pick one up at Fastnal.
 
JK's JK said:
I didnt realize that EVO made different type of stingers.....Or is that the same stinger???

You guys know the measurements of the bolt to flip the electric sway bar disconnect? I've been told in the past that I can pick one up at Fastnal.
Click to expand...

Same one.

I just bought it last week. Not sure of the size though. I just took the original bolt in and bought a longer one.
 
Brown Santa brought me a Jeep Rubicon 10th anniversary hood, the louvers and an AEV Snorkel and a ProCal module. I'm counting the days until the body shop reopens from the holiday break and installs the snorkel, cuts, paints and install the new hood...
ImageUploadedByWAYALIFE1388452177.287891.jpgImageUploadedByWAYALIFE1388452194.292337.jpgImageUploadedByWAYALIFE1388452208.198488.jpgImageUploadedByWAYALIFE1388452228.749818.jpgImageUploadedByWAYALIFE1388452245.655044.jpg

Jorge
 

Attachments

  • ImageUploadedByWAYALIFE1388452148.593337.jpg
    ImageUploadedByWAYALIFE1388452148.593337.jpg
    66.6 KB · Views: 297
Evo stinger and d ring mounts showed up. Got then from Northridge!
Sent from my SCH-I535 using WAYALIFE mobile app
 

Attachments

  • 1388459975354.jpg
    1388459975354.jpg
    65.8 KB · Views: 287
  • 1388459987392.jpg
    1388459987392.jpg
    47.7 KB · Views: 291
JK's JK said:
That's a good idea. If you do have the receipt by chance and it says the size let me know.
Click to expand...

should be a M10-1.50 x 100. the factory one worked fine, you just have to drill a little to make room for the shoulder of the bolt.
 
JK's JK said:
I'll have to investigate this shoulder you speak of!!!! :thinking:
Click to expand...

the factory bolt works just fine, you just have to use a 1/2" drill bit and drill a 1/2 deep on the correct hole. no need to spend money if you have a 1/2 " drill bit. i think stizzychris? has a writeup on it. the evo 1/4 pounder has instructions on it. kinda hard to see on them.but easier to drill if you have the bumper off
 
Last edited:
olram30 said:
the factory bolt works just fine, you just have to use a 1/2" drill bit and drill a 1/2 deep on the correct hole. no need to spend money if you have a 1/2 " drill bit. i think stizzychris? has a writeup on it.
Click to expand...

I dont know about drilling into the electric sway bar for a 1/2.........I'll message him.
 
You must log in or register to reply here.
Top Bottom