VIDEO : HOW TO Install Beadlock Wheel for Beginners

[wayoflife]

Beadlock wheels are a must have for any Jeep Wrangler owner or really, anyone who drives any off-road vehicle and that's playing hard enough on the trails to need their tires to be running at a really low PSI. And by low, I'm talking about 10 PSI or under because at that pressure, the chances of rolling a bead becomes a lot higher. Fortunately, installing them on a big set of tires is a lot easier that you'd think and in this video, I'll show you how.

RECOMMENDED BUYS:
KMC Grenade Crawl Beadlock 17" Wheels: https://amzn.to/3X0qjIo
Nitto Ridge Grappler 38x12.50R17: https://amzn.to/3MYN8I5
Milwaukee M18 1/2" Impact Wrench: https://amzn.to/3lD3N87
Milwaukee M18 3/8" Impact Wrench: https://amzn.to/3C9b3Ox
Tekton 1/2" Torque Wrench: https://amzn.to/43zsUM5
Valve Stem Installer Tool: https://amzn.to/3CbuZ3m
Valve Stems: https://amzn.to/3C6ylol
Tire Lube: https://amzn.to/42Q7SYx
Tire Lube Applicator: https://amzn.to/3CpToUs
Antiseize: https://amzn.to/43TfgTF
Tire Inflator: https://amzn.to/45Y94vu

TPMS SENSORS:
JL/JT after 6/5/21: Mopar 68339096AB
JL/JT before 6/5/21: Mopar 68510382AA
JK Mopar 68406537AA: https://amzn.to/3ImiAwy

#beadlock #wayalife #Jeep #kmcwheels #kmc #nitto #nittotire #ridgegrappler #38inch #beadlockwheel #grenadecrawl #jlwrangler #jljeep #wranglerjl #jeepjl #howto #installation

* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.

 

[wayoflife]

And yes, for those of you who've been following our videos for a while now, this is something that we have done almost half a dozen times now but typically, as a part of a broader project. The main reason why we decided to do it again now, is so that we can focus on just the beadlock install and show others just how easy it is to do

 

[Trail Bud]

Very nice instruction.
Liked Ripley’s tire acrobatic moves too.

 

[AZVAJKU]

Awesome video!

I have mounted tires on beadlocks a few times and I learned several cool tips from this video. Very well done Cindy and Eddie. Also love the Ripley cam, especially at the 2:43-ish mark where she is intently watching you and wondering what could possibly be more important about what you were than playing with her.

 

[boardsurfer]

A step by step tutorial video? Surely the internet experts will have no problem with this.

Also watching you do this (and Mel in older videos) just makes me mad. There was A LOT more swearing when I did mine and I followed that same procedure.

 

[wayoflife]

Very nice instruction.
Liked Ripley’s tire acrobatic moves too.

LOL - glad you enjoyed seeing Ripley doing her thing

 

[wayoflife]

Awesome video!

I have mounted tires on beadlocks a few times and I learned several cool tips from this video. Very well done Cindy and Eddie. Also love the Ripley cam, especially at the 2:43-ish mark where she is intently watching you and wondering what could possibly be more important about what you were than playing with her.

LOL - happy to hear I was able to show some tips you weren't already aware of. And yes, Ripley would be right

 

[wayoflife]

A step by step tutorial video? Surely the internet experts will have no problem with this.

Also watching you do this (and Mel in older videos) just makes me mad. There was A LOT more swearing when I did mine and I followed that same procedure.

LOL - too funny

 

[pop2tu]

Great tutorial. It’s always nice when you can watch a step by step video before starting a project.

 

[jeeeep]

I switched from my step-up torque crisscross pattern to your method on the last set of beadlocks and it was so much faster; I'm sure my neighbors appreciated not hearing me cuss so much and I liked not taking such a long time to get them mounted.

 

[DirtHeadDavis]

Awesome! When I can afford beadlocks lol I'll refer to this without a doubt. Ripley stealing the show though as usual, obviously the highlight of the install.

 

[Shadow's_Jeep]

Looked so easy, even a 66 year old man like me could do that...LOL

 

[LS JK]

Just did mine thanks for video as always Eddie, and hope to see you guys down in Vegas soon!

 

[TrailHunter]

So easy a kid could do it. Jeep Looks PERFECT Eddie!!!

 

[Bullwinckle]

Great video on installing the beadlocks! Hoping to install mine finally this year. This video will help for sure. I’m glad you mentioned the anti seize I know it was back and forth here on the forum and was going to ask it so glad you mentioned it. I think I’ll add it for safe measures since my Jeep is not garaged for safe measures. Thanks again for this video! Loved seeing Ripleys tricks at the end!

So easy a kid could do it. Jeep Looks PERFECT Eddie!!!

Haha I’m going to have to show my girlfriend this to coax her to help me install them, we’ll see if it works. Wish me luck.

 

[wayoflife]

Great tutorial. It’s always nice when you can watch a step by step video before starting a project.

That's all we hope for with videos like this - to be able to help others with it

I switched from my step-up torque crisscross pattern to your method on the last set of beadlocks and it was so much faster; I'm sure my neighbors appreciated not hearing me cuss so much and I liked not taking such a long time to get them mounted.

LOL - too funny and yes, it sure makes it a lot faster

Awesome! When I can afford beadlocks lol I'll refer to this without a doubt. Ripley stealing the show though as usual, obviously the highlight of the install.

Hoping that comes sooner than later for you and yes, Ripley is the highlight for sure LOL

Looked so easy, even a 66 year old man like me could do that...LOL

LOL - awesome

 

[wayoflife]

Just did mine thanks for video as always Eddie, and hope to see you guys down in Vegas soon!

Sweet! Nice to see you went with 40's. Should be down next week. We definitely need to hook up

So easy a kid could do it. Jeep Looks PERFECT Eddie!!!

Awesome! Love the pic

Great video on installing the beadlocks! Hoping to install mine finally this year. This video will help for sure. I’m glad you mentioned the anti seize I know it was back and forth here on the forum and was going to ask it so glad you mentioned it. I think I’ll add it for safe measures since my Jeep is not garaged for safe measures. Thanks again for this video! Loved seeing Ripleys tricks at the end!



Haha I’m going to have to show my girlfriend this to coax her to help me install them, we’ll see if it works. Wish me luck.

LOL - tell her it'll be fun

 

[Disciple Off Road]

Nice video! Made it look easy I did notice the quick brow wipe after torquing haha I used to use simple green but saw Mel use the lemon Pledge in an older video and have been using it since!

 

[wayoflife]

Nice video! Made it look easy I did notice the quick brow wipe after torquing haha I used to use simple green but saw Mel use the lemon Pledge in an older video and have been using it since!

LOL - never said it wasn't a lot of work, just easier to do that most seem to thing

 

[EVO MFG]

Allways nice when you can find good help
-David