BitBucket Member Jun 26, 2015 #1 Put on the evo drag link flip kit but can't get my trackbar to line up. It is 1/2 inch longer then where the holes line up. Help Attachments 1435278683933.jpg 62.1 KB · Views: 103
Put on the evo drag link flip kit but can't get my trackbar to line up. It is 1/2 inch longer then where the holes line up. Help
10frank9 Web Wheeler Jun 26, 2015 #2 Use a jack underneath the axle to raise it up and lower it in order to get the hole to lineup.
olram30 Not That Kind of Engineer Jun 26, 2015 #5 metalic said: Have someone turn the wheel Click to expand... This works..
JKbrick Active Member Jun 26, 2015 #6 I used a ratchet strap around the frame and over through the "c" on the other side
BitBucket Member Jun 26, 2015 #7 10frank9 I owe you a beer. Move jack stand to frame lower axle slide in bolt. Face in palms
10frank9 Web Wheeler Jun 26, 2015 #8 BitBucket said: 10frank9 I owe you a beer. Move jack stand to frame lower axle slide in bolt. Face in palms Click to expand... Glad to be of service sir. Cheers.
BitBucket said: 10frank9 I owe you a beer. Move jack stand to frame lower axle slide in bolt. Face in palms Click to expand... Glad to be of service sir. Cheers.
wayoflife Administrator Staff member Jun 26, 2015 #9 metalic said: Have someone turn the wheel Click to expand... Single best and easiest way to do it right here :yup:
metalic said: Have someone turn the wheel Click to expand... Single best and easiest way to do it right here :yup:
