Today I learned...

[Panda]

I thought it would be cool to start this thread to help each other learn from each other's mistakes or things we found out the hard way
Example: this is when my friend Rick learned hydro assist is a force to be reckoned with
Today I learned the evo rear track bar bracket for the enforcer lift is different from the coil over relocation bracket :doh:
How bout you guys? Learned anything the hard way?

 

[Serg5000]

I learned that having the proper sway bar angle will prevent tire side wall damage.
Having it set as in the pic is the correct way.

 

[Panda]

I learned that having the proper sway bar angle will prevent tire side wall damage.
Having it set as in the pic is the correct way.

That's good stuff to know :yup: :thumb:

 

[2007blackJk]

That's good stuff to know :yup: :thumb:

X2 :thumb:

Panda, can you spin the coil ?

 

[Panda]

X2 :thumb:

Panda, can you spin the coil ?

Oh no it's way too close I have the coil over bracket which is much different from the enforcer bracket, which none of this is evo's fault, long story, lol thanks though

 

[olram30]

Oh no it's way too close I have the coil over bracket which is much different from the enforcer bracket, which none of this is evo's fault, long story, lol thanks though

I have a coil over bracket also. Didn't work either.

 

[ridg3runner]

Wasn't today,But...I learned how to uninstall, reinstall AND uninstall, reinstall my clutch twice in 24hrs or less because the one I got from Centerforce didn't fit right. View attachment 106022. Looked great all mounted up but just wouldn't engage. Now we're having the great debate with Them to get a refund, after they inspect it of course :banghead:

 

[Panda]

I have a coil over bracket also. Didn't work either.

Did you cut your factory bracket off like me before you realized it doesn't work only to disable your jeep till the new one comes?

 

[Panda]

Wasn't today,But...I learned how to uninstall, reinstall AND uninstall, reinstall my clutch twice in 24hrs or less because the one I got from Centerforce didn't fit right. View attachment 106022. Looked great all mounted up but just wouldn't engageView attachment 106023. Now we're having the great debate with Them to get a refund, after they inspect it of course :banghead:

Great learning experience there :grayno:

 

[Topking]

Wasn't today,But...I learned how to uninstall, reinstall AND uninstall, reinstall my clutch twice in 24hrs or less because the one I got from Centerforce didn't fit right. View attachment 106022. Looked great all mounted up but just wouldn't engageView attachment 106023. Now we're having the great debate with Them to get a refund, after they inspect it of course :

 

[2nd.gunman]

Sent from my iPhone using WAYALIFE mobile app

 

[AllAmericanInfidel]

I need to do a clutch job also ! What's the reason you went centerforce? Or did you go with a different clutch after all?


Sent from my iPhone using WAYALIFE mobile app

Lol, thread was from 2014. The guy you are quoting is long gone. If you have any questions I would suggest posting up a new thread in the tech section.


Sent from my iPhone using WAYALIFE mobile app

 

[WJCO]

Welcome to 2014. That dude disappeared like a key witness in a Clinton trial. Better start a new thread.

 

[VeruGE*144]

I learned that having the proper sway bar angle will prevent tire side wall damage.
Having it set as in the pic is the correct way.

How long are your links? Are you mounted in the factory location in the axle?

I need new links as well. I was looking at 12.5" long.


Sent from my iPhone using WAYALIFE mobile app

 

[VeruGE*144]

Fuck it is from 2014 [emoji849].... stupid me


Sent from my iPhone using WAYALIFE mobile app

 

[jkris]

Hahaha!


Sent from my iPhone using WAYALIFE mobile app