Bought some LED lights off of Amzn 110.00 shipped.

Took them apart, tossed the o-ring and I sealed them with DAP clear sealant ( not silicon , the clear roof flashing wicked stuff)

Install was easy but the pass side headlight casted tabs did not line up with the cradle inventions (Dremel) drivers side was fine. LED accents are tied into my Amber park lights. Middle wire is the park hot and the outside wire is the signal hot, you can wire them either way. You can also wire them into your low beams if you want.

Pictures are taken before it got dark. Low beams

High beams

Low beam and putco fog led bulb

High beam and putco fog

Quadratec 4" cubes only. 2 pillar mounted.

4" lift - 35" tires. Need to fine tune adjustments, I had stock housings adjusted with led putco bulbs before I bolted in the Amazon set. The Amazon lights are way brighter!! I'm very pleased but I'm not sure the oncoming traffic feels the same.
The lights do throw off some crazy beams up in the trees but again I still need to adjust them down I think. The led accent strips toss off some strange patterns on the ground and in the trees that may not be controllable.
Steve

Took them apart, tossed the o-ring and I sealed them with DAP clear sealant ( not silicon , the clear roof flashing wicked stuff)

Install was easy but the pass side headlight casted tabs did not line up with the cradle inventions (Dremel) drivers side was fine. LED accents are tied into my Amber park lights. Middle wire is the park hot and the outside wire is the signal hot, you can wire them either way. You can also wire them into your low beams if you want.

Pictures are taken before it got dark. Low beams

High beams

Low beam and putco fog led bulb

High beam and putco fog

Quadratec 4" cubes only. 2 pillar mounted.

4" lift - 35" tires. Need to fine tune adjustments, I had stock housings adjusted with led putco bulbs before I bolted in the Amazon set. The Amazon lights are way brighter!! I'm very pleased but I'm not sure the oncoming traffic feels the same.
The lights do throw off some crazy beams up in the trees but again I still need to adjust them down I think. The led accent strips toss off some strange patterns on the ground and in the trees that may not be controllable.
Steve