wwood
Member
I have a 2013 JKUR with a Teraflex 3" lift kit. In the process of installing EVO 3" plush ride springs (replacing the TF springs) I discovered that the TF rear Monster trackbar is hitting the exhaust pipe on the driver's side right at the muffler connection just before full stuff. Flipped the trackbar end for end to see if that would help but no, it hits both ways about 2" before the extended bump stops make contact. I also have the TF rear trackbar bracket which comes with their 3" lift kit. The TF bracket raises the trackbar mount at the axle and moves it out from the axle (about 2" farther than the factory bracket) toward the rear of the Jeep which is why the trackbar now hits the exhaust. Anybody see this problem and come up with a solution?
Last edited: