Sunpie LED headlights
- Thread starter Ginz
- Start date
SoCalDozer
New member
I almost bought those lights but ended up getting a killer deal on some JW speakers instead. Im honestly not that impressed with the speakers compared to my HID retrofit projectors I had on my last JK but they are nice.
The only thing I have heard about the Sunpies is some issues with the wires coming loose but you should be able to address that before you install them if you see anything loose.
I would like to see the beam pattern once you get them installed though!
JeepJeep75
New member
Are these a Chinese version of JWspeaker lights? They look the same. I guess you can't beat the price, and I'm sure even if they were a knock-off they are better that the glowing-butter stock lights. Post up some before/after night pics please.
Clark Griswold
New member
I have a set that I've had on for a month or so now, the output is so much better than stock it's hard to explain, had one flickering on high beam when first installed and they sent another anti flicker module right away but so far I really enjoy them. Make sure you adjust properly so you get the longest beam pattern without blinding other drivers. I went about 38" to the top of the hot spot of the beam, 36" just didn't cut it. Nobody has flashed me and you don't see light shining in their face either so I think it's good. Enjoy.
Ginz
Member
It looks like they are. But for what I paid, I can't really complain lol. It's like a sore dick, you can't beat it.
Sorry bout before pics, didn't think to do it. Here's an after install
I'll post again when it gets dark.
jeeeep
Hooked
use long thin zip ties, run it between the wires/connectors. had to do that with one of the TL connectors that kept popping loose.
Ginz
Member
No light
Fog light
New light
One issue, passenger high beam don't work. Same reason my brother returned, replaced, and passed them to me lol. I wouldn't recommend them, unless of course you get them for free, then they are awesome. I'll be getting the trucklite head and fog next month.
JeepJeep75
New member
Probably the best mod you can do. You will like the TruckLites. Do yourself a favor and get some horizontal headlight adjuster screws and put them in with the new TL's. Then you can dial them in perfectly.
Ginz
Member
So far no flickering.
My brother got those, I'm sure it makes a huge difference. These seem ok for now, but once I spend real cash, I'll definitely want to dial them in.
On another note, high beam started working again. Once I buy the new ones, I'll post these up for give away. For freebies they are pretty solid lol
FNGsport
New member
I have had the Sunpies for about 6 months with no issues. Did the same and zip tied between the wires on the connectors, connection was fine, but just for safe measure. The light output is much better than factory and the beam cutoff is surprisingly good I think I paid $160 and picked up matching fogs for $50. 
deezus
New member
Yes, I have a version of these, make sure the little box connector on included harness isn't below headlights hanging down as for some reason will cause that hi-beam to not come on. Mine have been working great and I also have the smoked led taillights.
deezus
New member
See my post.
Ginz
Member
Just saw this today, thanks, I'll check that out. It seems to have a mind of its own, sometimes yes, sometimes no. But I rarely use HB so it's not that serious.