Stock Wheel bended

[Guascone]

It's possibile to bend a rubicon 2015 stock wheel with 33" tires hitting a rock?
Today coming back from the trail I have seen the left rear wheel rolling excentric... The tire seams ok, the wheel have many deep scratches...any suggestion about what to search?

 

[10frank9]

Guessing it's a rear wheel? You probably bent an axle flange.

 

[Guascone]

It is so easy to bent the axle flange? It is possibile to streigthen it again ?
Do you suggest to change it?
Thanks!

 

[WJCO]

If you bent the axle flange, I wouldn't recommend trying to repair it. Replace it.

 

[Guascone]

Ok, thanks!
Do you suggest to replace it with a standard axle or an Alloy axle?

 

[BlackHawk08jk]

Take the tire off put it on flat ground and then roll it. If it wobbles pretty bad, then you more than likely bent your wheel

 

[Guascone]

Thanks but I have to change the title...axle shaft bent...[emoji22]

 

[noroad]

Ok, thanks!
Do you suggest to replace it with a standard axle or an Alloy axle?

I went they way of replacing with stock, just kept bending them. Just picked up ten factory shafts from Northridge 4x4 for a solid price and the warranty is pretty solid as well.

 

[Guascone]

I have bought ten factory shafts...picked up today! I chose the solid way as well

 

[Havoc40]

My stock rear flange bent super easy. All I did was slide off about a 10" tall rock into another rock. I couldn't see it visually, but my brakes started squealing horribly. Had to check run-out with an indicator.

I also chose to replace them with Ten Factory shafts.