Stock bump stops

[RockinAZJK]

Looking for some stock front bump stops. Mine has the teraflex extensions and I hate them. I'm going to evo bumps but need the oe bumps to work with it


Sent from my iPhone using WAYALIFE mobile app

 

[kbp810]

Do you mean the Evo/King hydraulic bump stops? If so, you don't need the OE rubber bump stop things; as you'll be cutting the bottom of the bump stop "can/tube" off, and the air bumps mount in the resulting tube.

 

[wayoflife]

Just to verify, are you talking about the yellow rubber jounce pads? The ones that are plugged into your TeraFlex extensions?

 

[RockinAZJK]

Just to verify, are you talking about the yellow rubber jounce pads? The ones that are plugged into your TeraFlex extensions?

Correct, I was assuming the pads were part of the extensions. I have a set of the standard evo 3" bump stops that I would rather use and get the extra inch of travel, upon inspection I should be completely free clearance wise


Sent from my iPhone using WAYALIFE mobile app

 

[BaddestCross]

The pads are factory. You pull them out of the TeraFlex extensions and plug them back into the tube that drops down inside the spring.

Sent from my SM-N915P using WAYALIFE mobile app

 

[cozdude]

Correct, I was assuming the pads were part of the extensions. I have a set of the standard evo 3" bump stops that I would rather use and get the extra inch of travel, upon inspection I should be completely free clearance wise


Sent from my iPhone using WAYALIFE mobile app

They are not part of the extension. Just take them out of the TF extension and your good to go

 

[RockinAZJK]

Kickass, thanks guys! Anyone know a trick to getting them out? Or so I just man up and pull? Lol


Sent from my iPhone using WAYALIFE mobile app

 

[cozdude]

Kickass, thanks guys! Anyone know a trick to getting them out? Or so I just man up and pull? Lol


Sent from my iPhone using WAYALIFE mobile app

Man up and pull